Catalogs >
Xtratherm >
XtroLiner Partial Fill Cavity Wall [XO/CW]

XtroLiner Partial Fill Cavity Wall [XO/CW]
4Pages

Catalog excerpts

XtroLiner Partial Fill Cavity Wall [XO/CW] - 1

Class ‘O’ Modified PIR Insulation Fire Performance Thermal Conductivity Extensive Range Product Specifications Class ‘O’ Modified PIR Insulation Walls XO/CW Partial Fill Cavity Key Features Class ‘O’ Modified PIR Thermal Conductivity 0.021 W/mK HCFC/CFC Free Zero ODP Class ‘O’/Low Risk Fire Rating For New Build or Refurbishment

Open the catalog to page 1

XtroLiner Partial Fill Cavity Wall [XO/CW] - 2

Product Specifications XO Partial Fill Cavity Our XtroLiner XO range of modified PIR offers excellent insulation performance with thermal conductivity of 0.021 W/mK and a Class ‘O’ fire rating. XtroLiner is CFC & HCFC free and is manufactured under the highest standards of ISO 9001 and 14001 Quality and Environmental Management Systems. The XtroLiner board has a core of modified polyisocyanurate (PIR) bonded to low emissivity textured aluminium foil facings. Partial Fill Cavity Insulation Insulation value Xtratherm XO/CW Partial Fill Cavity Wall insulation is the solution of choice to...

Open the catalog to page 2

XtroLiner Partial Fill Cavity Wall [XO/CW] - 3

Residual Cavity Wall Ties A Residual cavity is the air space retained when the Xtratherm XO/CW Partial Fill Cavity Wall insulation is placed in the cavity of a wall. For wall heights up to 12m a minimum 25mm cavity is recommended, and a minimum 50mm cavity for wall height greater than 12m, and up to and including 25m. The insulation should be secured to the outer face of the inner leaf by a retaining clip on approved double drip type stainless steel wall ties that conform to BS EN 845-1:2003. Xtratherm XO range is manufactured to EN ISO 13165 under quality systems approved to EN ISO...

Open the catalog to page 3

XtroLiner Partial Fill Cavity Wall [XO/CW] - 4

Class ‘O’ Modified PIR Insulation Cavity Wall Partial Fill Floors Solid & Suspended Systems XtroLiner XO/CW is an insulation for cavity walls where a residual cavity has to be maintained. The excellent thermal performance of the XtroLiner allows for very good U-values to be achieved whilst minimizing overall cavity wall thickness. XO/CW can be combined with Xtrathem Thermal Liner Boards to achieve U-values down to Zero Carbon fabric standards in traditional wall thicknesses. XtroLiner XO/UF under floor insulation boards are used to reduce the thermal transmittance of ground supported and...

Open the catalog to page 4