Catalogs >
Xtratherm >
Warm-R External Wall Insulation Board [EWB/EPSP]

Warm-R External Wall Insulation Board [EWB/EPSP]
2Pages

Catalog excerpts

Warm-R External Wall Insulation Board [EWB/EPSP] - 1

Product Specifications External Wall Insulation Board Thermal Conductivity BRE Green Guide A Rated Manufactured without Xtratherm Warm-R is a high quality expanded Polystyrene containing integrated graphite within the cell structure that reflects and absorbs radiant heat resulting in an improved thermal insulation performance. The Xtratherm EWB/EPSP is an Expanded Polystyrene with Graphite/Carbon Enhancement. The graphite particles act as infrared absorbers to reduce heat dissipation caused by the radiation. This improves the thermal conductivity on conventional expanded polystyrene products. Xtratherm EWB/EPSP provides thermal insulation to new and existing rendered (All surfaces should be sound) Xtratherm EWB/EPSP insulation board is suitable for mechanical fix to sound substrate using approved fixings at a specified rate per board. When considering use on uneven surfaces then bedding shall be required in accordance with Xtratherm EWB/EPSP range Quality Management System Environmental Management System Occupational Health and Safety Management Systems. Specification Clause The wall insulation shall be Xtratherm Warm-R EWB/EPSP manufactured by Xtratherm, comprising a CFC/HCFC free graphite enhanced EPS___mm for the wall element. To be installed in accordance with instructions issued by Xtratherm. Refer to NBS clause Property & Units Thermal Conductivity Length Tolerance Width Tolerance Thickness Tolerance Flatness Tolerance Squareness Tolerance Dimensional Stability Compressive Strength Tensile Strength Fire Properties Warm-R EWB/EPSP Warm-R EWB/EPSP Typical R-values More than insulation

Open the catalog to page 1

Warm-R External Wall Insulation Board [EWB/EPSP] - 2

Product Specifications External Wall Insulation Board More than insulation U-values-External Wall Board (EPSP) Wall Type Cavity Empty Hollow Block Solid Block & Thermal Conductivity EPSP: EN13163: Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) Specification. Warm-R Enhanced EPS has a thermal conductivity (90/90 value) System Compatibility Each EWI system supplier must refer to the published physical properties and standards to which Xtratherm EWB/EPSP is manufactured and take the necessary actions to establish the suitability for each...

Open the catalog to page 2