1. Catalogs
  2. Xtratherm
  3. THERMAL LINER

THERMAL LINER

THERMAL LINER

THERMAL LINER

Product catalog summary
Overview: The document provides detailed information about Xtratherm Thin-R Thermal Liner XT/TL, a high-performance insulation product designed for drylining walls. It highlights the product's specifications, installation guidelines, and environmental credentials.
Key Features: The XT/TL insulation board offers high thermal performance with a certified thermal conductivity as low as 0.022 W/mK. It includes an integral vapour control layer and is HCFC/CFC free with a Global Warming Potential (GWP) of less than 5. The product is BRE Green Guide A+ rated and EST approved.
Specifications: The insulation board consists of a Polyisocyanurate (PIR) core with a kraft paper facing, bonded to a 12.5mm tapered edge plasterboard. It is available in various thicknesses and is designed for internal applications, providing both insulation and drylining in one operation.
Installation Guidelines: The XT/TL board should be installed using adhesive dabs in accordance with BS8212:1986 & BS 800: Part 8: 1994. Fire stops must be provided along the top and bottom of each sheet and around openings to prevent fire penetration and thermal looping. Mechanical fixings are recommended after adhesive drying.
Environmental and Safety Standards: The product is manufactured under ISO 14001:2004 Environmental Management and ISO 9001:2008 Quality Management Systems. It is durable, rot-proof, and effective for the building's lifespan, provided it is installed correctly.
Additional Products: The document also mentions other Xtratherm products for various applications, including insulation for timber-framed walls, floors, roofs, and cavity walls.
Contact Information: Xtratherm provides technical support and guidance through its accredited team, ensuring compliance with energy efficiency goals and building regulations.
See more

Catalog excerpts

THERMAL LINER-1

Thermal Conductivity Extensive Range Wall Insulation Board (UK) Drylining Walls Fixed with Adhesive Dabs High Thermal Performance Certified Thermal Conductivity Integral Vapour Control Layer Energy Saving Trust Approved Product * BRE Green Guide A+ Rated More than insulation

 Open the catalog to page 1
THERMAL LINER-2

XT/TL Insulation for Drylining walls Fixed with Adhesive Dabs Xtratherm Thin-R Thermal Liner XT/TL is a composite insulated panel of Xtratherm Polyiso (PIR) core with a composite kraft paper facing bonded to 12.5mm tapered edge plasterboard for internal applications, fixed with propriety adhesive bonding. XT/TL is designed to provide high levels of thermal insulation and dry lining in one operation for masonry walls. 1 Integral vapour control layer Integral vapour control layer Drylining & Insulation in one fix The facing on Xtratherm boards provide a gas and vapour tight barrier, taping and...

 Open the catalog to page 2
THERMAL LINER-3

Standards Xtratherm Thin-R range is manufactured to EN ISO 13165 under Quality Systems approved to EN ISO 9001:2008 quality management, EN ISO 14001:2004 environmental management and BS OHSAS 18001 Health and Safety Management System. Installation Guidelines Plaster-dab Bonding XT/TL Align the XT/TL Thermal Liner squarely on wall. Allow a 15mm expansion joint at the top and bottom of the panel, and fill with foam filler. Mark the position of the panel on the wall. Xtratherm Thin-R should be stored off the ground, on a clean, flat surface and must be stored under cover. The polythene wrapping...

 Open the catalog to page 3
THERMAL LINER-4

Xtratherm Technical Services All the members of our technical team are individually BBA accredited to help you reach your low energy goals. BBA qualified in U-value calculation, condensation risk and also Thermal Bridging 3D analysis backed by BRE accreditation – when you call Xtratherm, you can be assured you’re speaking to a qualified person. Walls: Insulation for Partial Fill Cavity Wall Walls: Full Fill Built-in Insulation for Traditional Build Walls: Insulation with enhanced performance for Partial Fill Cavity Walls Floors: Insulation for Ground Supported and Suspended Floors Walls: Insulation...

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.