Catalogs >
Xtratherm >
Safe-R Pitched Roofs [SR/PR]

Safe-R Pitched Roofs [SR/PR]
4Pages

Catalog excerpts

Fire Performance Thermal Conductivity Extensive Range Superior Performance Insulation Roofs SR/PR Insulation for Pitched Roofs Key Features Superior Performance Phenolic Thermal Conductivity as low as 0.020W/mK Low Smoke Obscuration HCFC/CFC Free Zero ODP Class ‘O’/ Low Risk Fire Rating For New Build or Refurbishment Fast Response Heating Superior performance phenolic insulation

Open the catalog to page 1

SR Pitched Roofs Xtratherm Safe-R is a superior performance rigid insulation with enhanced fire performance, consisting of a Class ‘O’ phenolic foam core with negligible smoke obscuration. Safe-R is faced with low emissivity aluminium facings both sides, and has a thermal conductivity as low as 0.020W/mK. Using Xtratherm Safe-R SR/PR on sloped roof areas can provide the most efficient U-values with minimal intrusion into valuable living space. Warm Roof construction is a particularly effective way of insulating complex roofs. Insulating above and between the roof timbers ensures that the...

Open the catalog to page 2

Ventilated Roof Typical U-Values Allow for ventilation gaps normally 50mm. (May be reduced depending on breather membrane certification). (Warm Roof) Cut Xtratherm SR/PR boards to fit tightly between rafters flush with rafter bottom. An additional 2nd layer should be added to the underside of the rafter. Run second layer transverse to the first. Temporarily fix with nails. Provide vapour control layer (Aluminium tape joints). Finish with 12.5mm plasterboard fixed with drylining screws. Screw fix every 150mm, 12mm from edge of boards. All board edges should be supported. Safe-R Thickness...

Open the catalog to page 3

Superior performance phenolic insulation Superior Performance Insulation Xtratherm Technical Services All the members of our technical team are individually BBA accredited to help you reach your low energy goals. BBA qualified in U-value calculation, condensation risk and also Thermal Bridging 3D analysis backed by BRE accreditation – when you call Xtratherm, you can be assured you’re speaking to a qualified person. Walls Insulation for Partial Fill Cavity Wall Rainscreen Insulation for Rainscreen Application Walls Insulation for Drylining Walls Dot & Dab Roofs Insulation for Pitched Roofs...

Open the catalog to page 4