1. Catalogs
  2. Xtratherm
  3. Safe-R Partial Fill Cavity [SR/CW]

Safe-R Partial Fill Cavity [SR/CW]

Safe-R Partial Fill Cavity [SR/CW]

Safe-R Partial Fill Cavity [SR/CW]

Product catalog summary
Overview: The document provides detailed information about Xtratherm's superior performance phenolic insulation, specifically the SR/CW partial fill cavity wall insulation. It highlights the product's key features, specifications, installation guidelines, and environmental considerations.
Key Features: The insulation offers superior thermal conductivity as low as 0.020W/mK, low smoke obscuration, and is HCFC/CFC free with zero ozone depletion potential. It is suitable for both new builds and refurbishments, providing fast response heating and maintaining a residual cavity for moisture protection.
Specifications: The insulation is manufactured to BS EN 13166:2008 standards, featuring a rigid phenolic core with low emissivity foil facings. It is available in various thicknesses ranging from 40mm to 120mm, with corresponding R-values provided for each thickness.
Installation Guidelines: The document outlines the importance of maintaining a residual cavity, proper securing of insulation with stainless steel wall ties, and ensuring clean and dry conditions during installation. Specific instructions for wall tie placement and cavity maintenance are provided.
Standards and Compliance: Xtratherm Safe-R is produced under EN ISO 9001:2008, EN ISO 14001:2004, and BS OHSAS 18001 standards, ensuring quality, environmental, and health and safety management compliance.
Environmental Impact: The product is manufactured without CFCs or HCFCs, has a low global warming potential, and is sourced from ISO 14001 accredited suppliers, emphasizing its environmental sustainability.
Durability and Storage: The insulation is stable and rot-proof, designed to last the building's lifespan. It should be stored off the ground and protected from the elements, with specific handling instructions to avoid damage from chemicals.
Technical Support: Xtratherm offers technical support with BBA accredited team members for U-value calculations, condensation risk, and thermal bridging analysis. Comprehensive installation guidance and certification are available on their website.
See more

Catalog excerpts

Safe-R Partial Fill Cavity [SR/CW]-1

Fire Performance Thermal Conductivity Extensive Range Superior Performance Insulation Walls SR/CW Insulation for Partial Fill Cavity Wall Key Features Superior Performance Phenolic Thermal Conductivity as low as 0.020W/mK Low Smoke Obscuration HCFC/CFC Free Zero ODP Class ‘O’/ Low Risk Fire Rating For New Build or Refurbishment Fast Response Heating Superior performance phenolic insulation

 Open the catalog to page 1
Safe-R Partial Fill Cavity [SR/CW]-2

SR Partial Fill Cavity Xtratherm Safe-R is a superior performance rigid insulation with enhanced fire performance, consisting of a Class ‘O’ phenolic foam core with negligible smoke obscuration. Safe-R is faced with low emissivity aluminium facings both sides, and has a thermal conductivity as low as 0.020W/mK. Partial Fill Cavity Insulation Insulation value Xtratherm SR/CW partial fill cavity wall insulation is the solution of choice to achieve the lower U-values asked for under the building regulations whilst maintaining a residual cavity as a protection from wind driven rain. SR/CW Partial...

 Open the catalog to page 2
Safe-R Partial Fill Cavity [SR/CW]-3

Residual Cavity Wall Ties A Residual cavity is the air space retained when the Xtratherm SR/CW Partial fill Cavity Wall insulation is placed in the cavity of a wall. For wall heights up to 12m a minimum 25mm cavity is recommended, and a minimum 50mm cavity for wall height greater than 12m, and up to and including 25m. The insulation should be secured to the outer face of the inner leaf by a retaining clip on approved double drip type stainless steel wall ties that conform to BS EN 845-1:2003. Xtratherm Safe-R range is manufactured to EN ISO 13166 under Quality Systems approved to EN ISO 9001:2008...

 Open the catalog to page 3
Safe-R Partial Fill Cavity [SR/CW]-4

Superior performance phenolic insulation Superior Performance Insulation Xtratherm Technical Services All the members of our technical team are individually BBA accredited to help you reach your low energy goals. BBA qualified in U-value calculation, condensation risk and also Thermal Bridging 3D analysis backed by BRE accreditation – when you call Xtratherm, you can be assured you’re speaking to a qualified person. Walls Insulation for Partial Fill Cavity Wall Rainscreen Insulation for Rainscreen Application Walls Insulation for Drylining Walls Dot & Dab Roofs Insulation for Pitched Roofs Walls...

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.