Catalogs >
Xtratherm >
Safe-R DryLining (Adhesive) [SR/TB]

Safe-R DryLining (Adhesive) [SR/TB]
4Pages

Catalog excerpts

Fire Performance Thermal Conductivity Extensive Range Superior Performance Insulation Walls SR/TB Insulation for Drylining Walls Dot & Dab Key Features Superior Performance Phenolic Thermal Conductivity as low as 0.020W/mK Low Smoke Obscuration HCFC/CFC Free Zero ODP Class ‘O’/ Low Risk Fire Rating For New Build or Refurbishment Fast Response Heating Superior performance phenolic insulation

Open the catalog to page 1

SR Insulated Plaster Board Xtratherm Safe-R is a superior performance rigid insulation with enhanced fire performance, consisting of a Class ‘O’ phenolic foam core with negligible smoke obscuration. Safe-R is faced with low emissivity aluminium/glass tissue facings, and has a thermal conductivity as low as 0.020W/mK. General The joints between Xtratherm ST/TB boards should be taped and filled in accordance with drylining good practice. The Safe-R Thermal Liner boards achieve a resistance greater than 100 MN.s/g. Improved vapour resistivity when required, can be provided with two coats of...

Open the catalog to page 2

Standards Xtratherm Safe-R range is manufactured to EN ISO 13166 under Quality Systems approved to EN ISO 9001:2008 Quality Management, EN ISO 14001:2004 Environmental Management and BS OHSAS 18001 Health and Safety Management System. Installation Guidelines Plaster-dab Bonding SR/TB Align the SR/TB Thermal Liner squarely on wall. Allow a 15mm expansion joint at the top and bottom of the panel, and fill with foam filler. Mark the position of the panel on the wall. Apply adhesive dabs to the wall in accordance with BS8212:1986 & BS 800: Part 8: 1994. Vertical dabs @ 300mm cs 25mm in from...

Open the catalog to page 3

Superior performance phenolic insulation Superior Performance Insulation Xtratherm Technical Services All the members of our technical team are individually BBA accredited to help you reach your low energy goals. BBA qualified in U-value calculation, condensation risk and also Thermal Bridging 3D analysis backed by BRE accreditation – when you call Xtratherm, you can be assured you’re speaking to a qualified person. Walls Insulation for Partial Fill Cavity Wall Rainscreen Insulation for Rainscreen Application Walls Insulation for Drylining Walls Dot & Dab Roofs Insulation for Pitched Roofs...

Open the catalog to page 4