High performance proprietary reveal insulation ISSUE 1 2009 Cost effective thermal solutions Close-R Insulated Cavity Closer More than insulation

Wall XT/CW Thermal IP1/06 Measured U-value Liner Psi Target Psi-value 0.27 60mm - 0.05 0.006 0.22 80mm - 0.05 0.008 0.18 100mm - 0.05 0.010 0.18 60mm 30mm 0.05 0.004 • Saves Time. • Cost effective. • No cut return/Nib block required. • Suits 100 - 150mm cavities. • Meets new Part L requirements. • Available from Builder Merchants. Xtratherm Close-R Xtratherm Close-R fully insulated cavity closers are a cost effecive solution for builders and specifiers for the closing of cavities around window and door openings, preventing cold bridging, damp penetration, air infiltration and condensation. The...

Close-R With optional Uni-tie. The ribbed surface of Close-R will accept wet plaster or plasterboard on dabs. Best practice would suggest priming the Close-R surface prior to finishing. Checked fit - Brick Outer With Uni-tie. Checked fit - Plus Thermal Liner (Enhanced Accredited Detail) Close-R Uni-ties With Uni-tie. Code Length Cavity XT/CW No. Per Width Thickness Pack CLF3025100 3000 100 Max 60 6 CLF3025120 3000 120 Max 80 6 CLF3025140 3000 140 Max 100 6 CLF3025150 3000 150 Max 110 6 Code Length Cavity XT/CW No. Per Width Thickness Pack CLC3025100 3000 100 Max 60 6 CLC3025120 3000 120 Max 80...

The Xtratherm range of engineered components builds to provide the complete solution to ensure continuity of the insulated envelope, delivering unrivaled thermal bridging detailing and enhanced DEAP performance. Partial Fill Cavity Wall XT/CW T&G Technical Support The Xtratherm Technical Support team provide a single point of contact to offer assistance on a wide range of issues for both the Designer and Builder and can be contacted by phone, fax or e-mail. Full details of all Xtratherm products, along with full technical literature can be downloaded from the web site at: www.xtratherm.com Xtratherm...