SLIMdri Surface-Mounted ADA Compliant Hand Dryers WORLD DRYER Electrical specifications: Cover options: Cast Aluminum - with epoxy paint or chrome plating. Stainless Steel - with polished or brushed finish SLIMdri™ is an energy efficient, surface-mounted and ADA compliant hand dryer. The SLIMdri hand dryer is perfect for all commercial washrooms. The On/Off heating control, stylish low-profile design with flexible cover options and universal voltage features fits any decor or washroom environment. Product Benefits • Surface-mounted ADA compliant • Simplifies installation and reduces installation costs • Up to 40% faster dry time than leading competitive surface-mounted ADA dryers • Up to 70% less energy than competitive dryers • Universal voltage - accepts 110-120 / 208 / 220-240 VAC input • ON/OFF heat control to customize comfort and energy savings • Incorporates SteriTouch® antimicrobial technology inhibiting the growth of bacteria, mold and fungus extending the dryer's service life • Automatic activation • IP23 rating - protection against harmful water ingress • Ultra compact and contemporary stylish design • Durable and vandal resistant Architecture & Engineering Specifications SLIMdri™ hand dryer shall be manufactured by World Dryer Corporation to include a cover constructed of either die-cast aluminum finished with epoxy paint or chrome plating; or stainless steel. The wall mounting plate shall be constructed of die-cast aluminum and the nozzle shall be constructed of die-cast aluminum finished with epoxy paint finish. Epoxy painted covers shall incorporate SteriTouch® antimicrobial technology. The cover shall be attached to the wall mounting plate with tamper-proof screws. Motor shall be a thermally-protected universal brush type motor operating at 13,000 RPM and delivering 70 CFM air flow at a velocity of 140 MPH (12,320 LFM). Dryer shall incorporate universal controls accepting 115 / 208 / 230VAC input. Dryer will incorporate a chrome wire heating element protected by an automatic resetting thermal cutoff. Dryer shall be activated by an automatic infrared sensor with a 3 second run-on time and 60 second vandal shut-off. Control board shall contain a heater control switch which can be controlled in either ON or OFF position. Dryer shall provide a 48°F temperature rise. Dryer shall have an ingress protection rating of IP23. Hand dryers shall be certified to Underwriters Laboratories, Inc. standards for safety.

Placement Instruction • Hand dryers should be spaced at least 2 feet apart, near but not over the wash basin • In congested areas, dryers should be located to create a flow from wash basin to dryer to exit • SLIMdri should be mounted at least 18” above or away from reflective surfaces which may interfere with the automatic sensor operation. • Dryer Quantity Recommendation: Average Traffic: 1 dryer per 2 wash basins Heavy Traffic: 1 dryer per wash basin Industrial 54” Circular wash fountains: 4 dryers per sink • Recommended mounting heights from floor to dryer bottom edge RoHs Installation Guide...