TECHNICAL BROCHURE

WOODN GREENWOOD SRL Registered office: Sestiere San Marco, 3829 - 30124 Venezia (VE), ITALY Via Ippolito Caffi, 17 - 32100 Belluno (BL), ITALY tel: +39 049 89.60.706 [email protected] Production site: Strada Scudetto, 9 - 31100 - Treviso (TV), ITALY Copyright © WOODN GREENWOOD SRL All rights reserved Printed by da Europrint ganuary 2024

• WOODN - General Info - Colors and finishes pag. 8 • WOODN VERSATILIS - Sunscreen-louvers-pergolas-fences pag. 13 • WOODN MODULATUS - Outdoor-Indoor Cladding/Ceiling Pag. 53 • GREENWOOD - General Info - Colors and finishes pag. 99 • GREENWOOD - Greendeck- Outdoor Decking pag. 106 • GREENWOOD - Evodeck - Outdoor Decking pag. 112 • GREENWOOD - Slimdeck - Outdoor Decking pag. 118 • ESOSTEP - General Info - Colors and finishes pag. 129 • ESOSTEP - Full- - Outdoor Decking pag. 134 • HANDING, CLEANING AND MAINTENANCE pag. 142

WOODN - VERSATILIS Sunscreen - louvers pergolas - fences WOODN VERSATILIS: VERTICAL BEAUTY LOUVERS: VARIOUS PROPOSALS FOR COUNTLESS SOLUTIONS. IT IS A SUNSCREEN FOR POSITIVE ENERGY BUILDINGS, GUARANTEEING REDUCED CONSUMPTION AND LIVING COMFORT. ASSEMBLED WINDOWS AND SCREENS: AS YOU LIKE, SEVERAL COMPOSITIONS AND DESIGNS. FENCES AND PERGOLAS: A READY-MADE SOLUTION, EASY TO ASSEMBLE AND SAFE. WOODN - MODULATUS Outdoor/indoor cladding Outdoor/indoor ceilings WOODN MODULATUS: TOTAL LOOK CLADDING: A SIDING FOR EXTERIORS, WHICH QUALIFIES THE BUILDING IN TERMS OF BEAUTY AND FUNCTIONALITY. WITH ITS CERTIFIED...

PROJECT CMR Milan- Italy (JF18041)

FINISHES AND COLORS WOODN Brushed (for Indoor and Outdoor applications) (only for Indoor applications) Colors and textures shown are purely indicative. Check every time a real sample for approval. Considering the presence of natural wood fibers, colors may vary from batch to batch.

COLOUR STABILITY Colour stability has been tested in compliance with accelerated weathering tests (UNI EN ISO 4892-2:2009 and UNI EN ISO 2105-A02:1996); the result of the test is expressed by assigning a numerical value to colour variation according to the international greyscale, which is a useful method to measure colors differences. Resistance to accelerated aging on Woodn profiles according to UNI norms EN ISO 4892-2:2009 and EN 20105-A02:1996. (*) The international greyscale goes from Grade 1 (maximum colour difference) to Grade 5 (minimum colour difference). In the first months after the...

The SRI index is a value that is attributed to some building materials and takes into account both the material’s ability to reflect solar radiation and the ability to emit solar radiation absorbed as thermal radiation. The steady-state temperature “Ts” and solar reflection index "SRI” were determined in accordance with standard ASTM E1980 - 11 (Approach 1) for three convective coefficients (rate of heat transfer) “hc”: - hc = 5 W/(m2 * K) corresponding to low-wind conditions (0 to 2 m/s); - hc = 12 W/(m2 * K) corresponding to medium-wind conditions (2 to 6 m/s); - hc = 30 W/(m2 * K) corresponding...

WOODN VERSATILIS Sunscreen - Louvers- Perglas - Fences

Hotel Le Massif - Courmayeur - Italy (TZ9555-R)

MATERIAL’S FEATURES Mechanical properties Chemical and biological features Evaluation of the action of microorganisms (scale from 0 to 5) The values shown are indicative and not binding. Test reports available upon request. The natural aging of the material and temperature variations may cause deviations from the values indicated above. The product is protected by a warranty in line with legal requirements: for more information see the SPECS on www.woodngreenwood.com

GENERAL INSTALLATION INSTRUCTIONS Key points to be followed before and during the installation process: • Store the material on a flat surface providing for a stable support on the whole surface, in a dry, clean area, protected from frost and direct sun light. • Before starting the installation, carefully check the material and notify immediately of any manufacturing issues. Complaints will not be accepted after installation. • Before starting the installation, check project’s drawings (or shop drawings if provided) and the correspondence of the received material against the packing list. • Acclimate...

EXPANSION GAP BETWEEN ADJACENT PROFILES WoodN, due to material’s composition’s features and extrusion technology, undergoes after the first exposure an initial dimensional shrinkage less than 0.4% of the profile length (max value established according to EN 479: 1995) and presents a linear contraction / dilatation due to temperature variations. At the end of the profile, leave a gap according to the relative size in the table below: = fixed point for expansion WARNING: if the application requires corners with planks cut at 45°, the fixed point must be in the corner. WARNING: when mounting planks...

PROFILES SECTION reinforcement standard dimensions [mm] weight of the reinforced profile [kg/m] section 30 x 20 standard length 2000 section 50 x 26 standard length 2000 section 40 x 30 standard length 2000 section 60 x 32 standard length 2000 section 70 x 40 standard length 2000 section 70 x 40 standard length 2000 section 70 x 40 standard length 2000

weight of the reinforced profile [kg/m] reinforcement standard dimensions [mm] section 95 x 55 standard length 2000 section 110 x 20 standard length 2000 section 120 x 58 standard length 2000 JF7040_30x15 section 180 x 41 standard length 2000 section 180 x 41 standard length 2000 section 222 x 114 standard length 2000

reinforcement standard dimensions [mm] weight of the reinforced profile [kg/m] section 60 x 60 standard length 2000 section 70 x 70 standard length 2000 section 113 x 113 standard length 2000 JF11020 section 180 x 180 standard length 2000 section 152 x 38 standard length 2000 section 200 x 58 standard length 2000 section 350 x 68 standard length 2000

reinforcement standard dimensions [mm] weight of the reinforced profile [kg/m] section 150 x 45 x 25 standard length 2000 section 305 x 101 x 61 standard length 2000 The external dimensions listed are nominal values. The weights of the planks indicated in the tables are indicative and not binding. Length tolerances according UNI EN-ISO 22768: class UNI EN-ISO 22768-vL. Refer to WoodN Technical Department or on website www.woodngreenwood.com for cad blocks and manufacturing tolerances. JF18041_165x30