Hopy D90 sink drain
4Pages

HOPY® 090 sink drain ULTRA-FLAT WITH EASY OPEN IN HOPY® ensures that drainage is discreet. : Integrated into the waste, the trap disappears completely '• and no longer gets in the way of a tidy bathroom. The : underside of the sink is accessible once more. j The waste filter also disappears, hidden by the valve, : which opens and closes when pressed down. • Optimum space saving : the trap is integrated into £ Attention paid to aesthetics : the waste filter and the inside of the waste are hidden by the valve. ^jj Easy to maintain : the trap is accessible from above. ^jj Easy and comfortable to use : press once and it opens, press again and it closes ! ^jj A single product for one and a half and twin basins, thanks to the integrated difference in height. WIRQUIN PLASTIQUES - 11 rue du Chateau de Bel Air - 44482 Carquefou Cedex FRANCE

Integrated offset height CHARACTERISTICS The twin or one and a half sink version can t on top of one and a half sinks and underneath twin sink basins without any extra parts. Just tilt the tubes to obtain the required height difference. Optimum space saving ! The trap and the waste have become one, the entire unit taking up less than 100mm of space. The area under the sink can be used to store saucepans and utensils again. AFTER BEFORE Offset height Optimum offset height : the height between the 2 sinks varies according to the interaxial of the wastes. The table below gives the minimum,...

Integrated offset height CHARACTERISTICS The twin or one and a half sink version can t on top of one and a half sinks and underneath twin sink basins without any extra parts. Just tilt the tubes to obtain the required height difference. Optimum space saving ! The trap and the waste have become one, the entire unit taking up less than 100mm of space. The area under the sink can be used to store saucepans and utensils again. AFTER BEFORE Offset height Optimum offset height : the height between the 2 sinks varies according to the interaxial of the wastes. The table below gives the minimum,...

TECHNICAL CHARACTERISTICS • Complete drainage for 1 x 090 sink • Complete drainage for one and a half and twin sinks (090) All components are made from polypropylene, except for: • The waste: polypropylene over-moulded in stainless steel • The overflow grid : chromed A.B.S • The waste washer: elastomer (S.B.S) • The overflow screw and bolt: stainless steel • The plug : body made from P.O.M + stainless steel trim The 2 versions of the HOPY sink drain are fitted with a tube leading to the wall and a bent connector with bolt and conical washer that allows immediate connection with the PVC...