WS-2AK dimensions and technical info Windside WS-2AK technical info: - Weight: approx.1000 kg - Swept area: 2 m2 - Generator: 36A in delta, 21A in star connection - Voltage: 12V battery charging mode 15V 24V battery charging mode 30V 48V battery charging mode 60V - For direct resistance load, voltage depends on use - Fastening of the turbine with20 pc of M20 bolts - Wind load, side force to the middle point of the vane, Calculated 1,1m down from the generator: 500 kg - The weight of the base depends on the height of the mast - in other words on the length of the torque arm. - WS-2AK-model Max 1100 rpm - WS-2AK Guaranteed at constant wind speed of 60 m/s Materials: - Vanes: fibre glass - Fastenings: marine grade aluminium - Shaft: 090 mm crome coated steel or stainless steel - Generator and Generator End Plates: dip galvanized steel or marine grade aluminium - All bolts stainless steel or dip galvanized (A4, A2 or Zn) Assets of Windside wind turbines: - No need to stop or secure during storms - Produces max. amount of energy in storms - No need to be turned to the wind direction - Soundless; less than 5 dB, measured in 2 meters distance from the vane - Stands snow, frost, heat and humidity - Long lifespan - Minimum need of maintenance, only lubrication - Safe to people, animals and nature Mounting holes D=22mm, 20 pcs. Bolts M20 Zn 8.8 OY WINDSIDE PRODUCTION Ltd E-maii and internet: finland@windside. com www. windside. com The Manufacturer reserves all rights to all modifications without further notice.