Design: Roy Fleedwood Nightspot High performance floodlights for discharge lamps and LEDs The Nightspot series of floodlights comes in three sizes and with rotationally symmetrical reflectors: - Nightspot Mini for 20 and 35 Watt miniature metal halide lamps or LEDs - 2 further sizes for 35 / 70 Watt and 150 / 250 Watt metal halide lamps These floodlights offer efficient and precise light distribution characteristics. In combination with the range of internally fitted accessories, they are adaptable tools for architectural lighting. 126 Nightspot The glare shield accessory eliminates glare from scattered light. This gives the floodlights optimal glare control.

Nightspot Gobo Projector One part of the Nightspot range is the series of gobo projectors for the projection of designs and logos with fine edge definition. The optical system inside the projector can take a gobo (glass or metal) and a dichroic colour filter simultaneously. Nightspot 127 Design: Roy Fleetwood In addition to a series of standard gobos, individually designed gobos can also be supplied. The pattern or image in a defined file format can be used to create the gobo. Coloured projections can be achieved using dichroic colour filters or glass gobos. The framer makes it possible to have...

128 Nightspot Mini Nightspot Mini Nightspot Mini, narrow beam For ceramic metal halide lamps (HIT-TC-CE) and low voltage reflector lamps (QR-CB) protection class I, IP65 , IK08 die cast aluminium housing, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure by 4 stainless steel screws, wall box: 2 drilled holes Ø 7 mm, spacing 77 x 93 mm, knuckle joint with 110° tilt range, swivel range 360°, cable entry 7 – 10 mm, for recessed or surface mounted cable, integral electronic ballast or...

Nightspot Mini 129 Nightspot Mini Nightspot Mini, wide beam For ceramic metal halide lamps (HIT-TC-CE) and low voltage reflector lamps (QR-CB) protection class I, IP65 , IK08 die cast aluminium housing, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure by 4 stainless steel screws, 2 drilled holes Ø 7 mm, spacing 77 x 93 mm, knuckle joint with 110° tilt range, swivel range 360°, cable entry 7 – 10mm, for recessed or surface mounted cable, integral electronic ballast or transformer,...

130 Nightspot Mini with wall arm Nightspot Mini with wall arm, narrow beam For ceramic metal halide lamps (HIT-TC-CE) and low voltage reflector lamps (QR-CB) protection class I, IP65 , IK08 die cast aluminium housing, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure by 4 stainless steel screws, wall box: 2 drilled holes Ø 7mm, spacing 77 x 93 mm, knuckle joint with 110° tilt range, swivel range 360°, cable entry 7 – 10 mm, for recessed or surface mounted cable, integral electronic...

Nightspot Mini with wall arm 131 Nightspot Mini with wall arm, wide beam For ceramic metal halide lamps (HIT-TC-CE) and low voltage reflector lamps (QR-CB) protection class I, IP65 , IK08 die cast aluminium housing, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure by 4 stainless steel screws, wall box: 2 drilled holes Ø 7mm, spacing 77 x 93 mm, knuckle joint with 110° tilt range, swivel range 360°, cable entry 7 – 10 mm, for recessed or surface mounted cable, integral electronic...

350 657 162 152 95 307 132 Nightspot Mini with earth spike Nightspot Mini with earth spike Nightspot Mini with earth spike, narrow beam For ceramic metal halide lamps (HIT-TC-CE) and low voltage reflector lamps (QR-CB) protection class I, IP65 , IK08 Luminaire made of die cast aluminium, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure by 4 stainless steel screws, power supply (electronic ballast or transformer) with integral stainless steel earth spike, supplied without lamp HIT-TC-CE...

Nightspot Mini with earth spike 133 Nightspot Mini with earth spike Nightspot Mini with earth spike, wide beam For ceramic metal halide lamps (HIT-TC-CE) and low voltage reflector lamps (QR-CB) protection class I, IP65 , IK08 Luminaire made of die cast aluminium, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure by 4 stainless steel screws, power supply (electronic ballast or transformer) with integral stainless steel earth spike, supplied without lamp HIT-TC-CE 20 W 1600 lm 8960243...

134 Nightspot Mini Nightspot Mini without control gear For ceramic metal halide lamps (HIT-TC-CE) protection class I, IP65 , IK08 die cast aluminium housing, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure by 4 stainless steel screws, base can be rotated 360°, 1 drilled hole Ø 6.5 mm, knuckle joint with 110° tilt range, M12 cable entry, with 0.8 M cable H05RN-F3G1, separate control gear unit required, supplied without lamp HIT-TC-CE 20 W 1600 lm 8960141 Abstand/Distance 6 m Ø 0,76...

Nightspot Mini LED 135 Nightspot Mini LED Variable light distribution using an additional optical lense. Equipped with 3 x 3 W high performance LEDs, thermal monitoring device, protection class I, IP65 , IK08 die cast aluminium housing, polyester powder coated, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure by 4 stainless steel screws, base can be rotated 360°, 1 drilled hole Ø 6.5 mm, knuckle joint with 110° tilt range, with 0.8 M cable H05RN-F3G1, integral transformer and on-board driver LED 340 lm 8965146 Abstand/Distance 6 m Ø 1,26 m 5 m Ø 1,05...