In-Line Tile Ventilators In-Line ventilators are designed to maximise the aesthetic features of the roof by being virtually unseen. All In-line vents are designed to fit seamlessly with its intended tile profile, whilst providing either roof space ventilation or an outlet for mechanical extraction. Due to different computer monitors/calibrations the images shown may not be an accurate representation of the final products colour. Product Technical Information Sheet Free vent area: 10,000mm2* Free Vent Area Spacing at low level (10,000mm2 per m): 1.0m intervals. Spacing at high level (5,000mm2 per m): 2.0m intervals. All tile vents can be laid at a minimum pitch of Minimum Pitch** 22.5°, or the minimum roof pitch of the compatible tile should that exceed 22.5° Tile Compatibility *Free vent area is 7,500mm2 on the low pitch 20/20 inline vent. Product specification is subject to change and will be updated accordingly. In-line ventilators can be used for both low-level and high-level ventilation, as well as for connection to soil or mechanical extraction pipes. Flexible pipes and pipe adaptors are available for connecting In-Line ventilators to soil or mechanical extraction pipes. See next page for pipe adaptor compatibility. For further guidance, download the In-line Tile Ventilator Installation Guide. Issue Date: 25/04/2022 **A low pitch Inline ventilator is available for the 20/20 tile which can be laid down to 15°. Roof enquiries

In-Line Tile VentilatorsProduct Technical Information Sheet Tile name: Number of Tiles Replaced Pipe Adaptor included with Cut Batten Required for vent Installation* Dual Calderdale Edge 1 *With some tile vents, the tile batten will need to be cut to allow the throat of the vent to sit correctly and an additional batten installed for mechanical fixing. Please refer to the installation guide for more information. Pressure drop charts for all of our In-Line Tile Ventilator's are available through the Sandtoft Technical department. 1000+ products to choose from Expert help and advice Comprehensive...