FLIGHT TYPE DISHWASHER FEATURES • Clean Rinse-function, perfect rinsing result, with lower water consumption. • Sensor-controlled automation. • Automatic cleaning of heat recovery unit. • ECO-FLOW - double heat recovery and HEAT-FLOW ensures the right temperature in the pre-wash. • Double final rinse system. • Large range of conveyor belts gives high flexibility. • The drying zone has well sound insulated fans that blow air onto the washed items from above and below. • The WD-Touch display guides you through the washing process with an intuitive touch screen. Easy navigation with built-in user manuals. The washing time is set to one of six different levels on the panel, which makes it easier for the user and gives a higher flexibility. Ergonomic, the work surfaces are in level with the conveyor, which makes it very easy to load and unload washing baskets without any heavy lifting. • Steam heated low steam pressure (50-149 kPa) or high steam pressure (150-250 kPa). • Efficient handling.The wide sides of the flight type machine act as stacking surfaces and facilitate the loading and unloading work. • Both the infeed and outfeed have generously dimensioned strainers for easy cleaning. • Safety, the machine stops automatically when a door opens during operation. Restart must be done after the door is closed. • Neutral zones between wash tanks with the length of 250 mm or 500 mm. • Increased effect in chemical tanks respectively drying zone. • Intermediate rinse, re-circulated final rinse water is used for an extra rinse. • Extra wide machine, 750 mm useful conveyor width. • Adaptation for demineralised water in the final rinse. • Automatic emptying of tanks. • Extra high machine, plus 100 mm. • Collision guard. • Timer start. • Recessed feed section from 900 mm to 800 mm. • Web tool with HACCP documentation with cost- and consumption report. • Stainless steel washing pumps. • Manual adjustment of washing pressure for heavy duty/normal wash ware. TECHNICAL DATA Pump motor, pre-wash (kW) Pump motor, chemical wash 1 (kW) Pump motor, chemical wash 2 (kW) Pump motor, chemical wash 3 (kW) Pump motor, recirculating rinse (kW) Drive motor, belt (kW) Booster heater 1 final rinse(kW) Booster heater 2 final rinse(kW) Tank heater, chemical wash 1 (kW) Tank heater, chemical wash 2 (kW) Tank heater, chemical wash 3 (kW) Heater, drying zone 1 (kW) Heater, drying zone 2 (kW)

TECHNICAL DATA CAPACITY AND OPERATING DATA CONNECTION, ELECTRICALLY HEATED MACHINE CONNECTION, STEAM-HEATED MACHINE 50-140 KPA CONNECTION, STEAM-HEATED MACHINE 150-250 KPA * The water consumption depends on local conditions. An exact adjustment is made during installation. ** When the machine is steam-heated *** Measured 1 metre from the side of the machine **** Other connection voltages on request

WATER, DRAIN AND VENTILATION CONNECTIONS SIZE AND WEIGHT FOR TRANSPORTATION. STANDARD, DIVIDED MACHINE* * Normal delivery in two parts. Option of delivery in more parts. ** Including packaging

1. Extractor 600x70 mm without damper. Air quantity, see technical specs 2. Extractor 400x50 mm without damper. Air quantity, see technical specs 3. Electrical connection from ceiling, alternative electrical connection from floor , see point 9 4. Hot water connection * 6. Steam connection * (steam-heated machine) Steam pressure 150-250 kPa Electrically heated drying zone) Steam pressure 50-140 kPa (Electrically heated drying zone) 7. Condensation water connection (steam-heated machine) 8. Floor drain 400x600 mm 9. Through channel for alternative electrical connection from floor and / or water...