WD-ACS47D CUTLERY DISHWASHER FEATURES • A unique washing system guarantees the best possible wash results. • The machine consists of a pre-wash, two chemical washing tanks, a double final rinse and a drying zone. • The machine has a large capacity and a compact design, and meets the highest hygiene standards. • HACCP function in the electronic control system monitors the washing process. • Low energy and water consumption. • Sound and heat insulated wich reduces noise level and heat emission to the room. • The cutlery washing machine can be incorporated into an automatic cutlery processing system, which washes and sorts cutlery without it being touched by dishwashing staff. The only people who touch the cutlery are the guests. • Can easily be connected to an ACS cutlery sorter. • Sensor-controlled automation. • ECO-FLOW - double heat recovery. • Double final rinse system. • The drying zone has well sound insulated fans that blow air onto the washed items from above and below. • The washing time is set to one of six different levels on the panel, wich makes is easier for the user and gives a higher flexibility. OPTIONS • Steam heated low steam pressure (50-149 kPa) or high steam pressure (150-250 kPa). • Stainless steel washing pumps. • Collision guard. • Automatic emptying of tanks. • Timer start. TECHNICAL DATA Pump motor, chemical wash (kW) Pump motor, final rinse (kW) Tank heater, chemical wash (kW) Enclosure protection class (IP) CAPACITY AND OPERATING DATA Pump capacity (l/min) Washing capacity (cutlery/h) (pcs.) Cold water consumption (litres/h) Sound pressure level, LPA (dBA)** Sound power level LWA (dBA)** * When the machine is steam-heated. ** Measured 1 metre from the side of the machine. CONNECTION, ELECTRICALLY HEATED MACHINE Total connected power (kW) * Other voltages on request. We reserve the right to make chang

CONNECTION, STEAM-HEATED MACHINE 50-250 KPA * Total connected power (kW) Steam (internal thread) Condensation connection (internal thread) * Other voltages on request. WATER, DRAIN AND VENTILATION CONNECTIONS Water quality, hardness (°dH) Hot water connection 55-70°C (internal thread) Cold water connection 5-12°C (internal thread)* Water connection, PP pipe (ø mm) Floor drain, capacity (litres/sec.) Heat load room, latent / sensitive / total (kW) * Required water pressure 3.5 kp/cm² with an output of 10 l/min. SIZE AND WEIGHT FOR TRANSPORT, STANDARD MACHINE Weight (kg) Including packaging Normal...