Cover, design and construct Things to know and technology

wedi products and systems are of a high standard of quality and have received numerous certications throughout Europe. 0799 (System 2+) wedi GmbH Hollefeldstraße 51 48282 Emsdetten 13 0799-CPD-132 DoP 0001 ETA-13/0385 ETAG 022 Teil 3 Bausatz mit wasserdichten Platten und weiteren Komponenten zur Herstellung einer Abdichtung unter einer Nutzschicht für die Verwendung in innen liegenden Nassbereichen deklarierte Produkt- und Systemeigenschaften siehe Anhang 1 der ETA-13/0385

Contents Technical data Page 4 wedi building board 6 wedi building board Construct 7 wedi Moltoromo 8 Surface design Mounting and attachment parts Page 10 Fastening and installation of bathroom furniture and accessories 11 Installation of reinforcement boards Cover Page 12 Wall covering 13 Pipe covering 14 WC drywall installation (bolt-connected) 15 WC drywall installation (bonded) Design and construct Page 16 Individual bathroom furniture 18 Shelves 19 Steps and platforms 20 Partition walls 21 Individual shapes 22 Freestanding wall systems

wedi building board Technical data wedi building board General product description The wedi building board has a blue core made from rigid extruded polystyrene foam. The rigid foam is reinforced with breglass fabric on both sides (with alkali-resistant nish) and coated with a polymer-modied cement mortar. Applications With its special properties, the wedi building board has a wide variety of applications: • Carrier element for laying tiles, slabs and natural stone oor coverings using the thin-bed method • Adhesive surface for applying plaster, tile adhesive and other materials • Moisture protection...

Technical data Technical properties – Rigid foam HCFC-free extruded polystyrene rigid foam with closed cell structure and ame-retardant additive. Long-term compressive strength (50 years) ≤ 2% compression EN 1606 Compressive resistance or compressive strength at 10% compression EN 826 Associated modulus of elasticity EN 826 Resistance to water vapour diffusion (μ) EN 12086 Water absorption under long-term immersion EN 12087 Capillary action Linear coefcient of thermal expansion Temperature limits Propellant gas, carbon dioxide, GWP value Technical data of building board Fire behaviour DIN 4102-1...

wedi building board / wedi building board Construct Technical data Thermal insulation values of the building board Actual U-values incl. transition values When determining the U-value, only the wedi building board and the heat transmission resistances 1/␣i and 1/␣a for external walls are taken into account. In specic applications, the existing masonry and other layers must also be included. Building board Construct, longitudinal, calculation of diameter Thickness (in mm) Full circles per board Building board Construct, transversal, calculation of diameter Thickness (in mm) Full circles per board...

Technical data wedi Moltoromo | Modular wall system General product description wedi Moltoromo is a modular wall system for quick and simple shower or room partitioning. Applications Shower and room partitioning for wet and dry areas that are covered with tiles, slabs or natural stone on at least one side. Product properties • Waterproof • Thermally insulating • Lightweight and stable Instructions for subsequent work Surface requirements Tiles, slabs or natural stone coverings and mineral plasters can be applied to the wall segments 24 hours after installation. Joints between walls, oor and ceiling...

wedi building board / building board Construct Surface design Surface design Ceramic coverings Ceramic coverings offer various possibilities for wall and oor design. Depending on the intended use and personal taste, there is a wide variety of tiles and boards with different shapes, colours and materials. Here, the wedi building board is the perfect carrier element for ceramic coverings as the tile can be installed directly to the board surface without any additional steps needed. Plasters and llers Today, plasters are not only used for creation of a plain surface for tiling, painting or wallpapering,...

Technical data Natural stone coverings Natural stone coverings have a very particular air. They are made from natural stones and maintain their visual appearance as they are neither ground nor polished. This results in special characteristics such as the irregular colouration or pattern. wedi building boards are an ideal carrier element and allow for easy and fast installation. Laminates / ready-to-lay parquets Laminates and ready-to-lay parquets are an alternative to ceramic oor coverings. Laminate is a comparatively low-priced material that is only coated with a decorative layer; parquet is...

wedi building board Attachment parts Fastening and installation of bathroom furniture and accessories Tile wedi building board wedi building board wedi 610 adhesive sealant Reinforcement board, e.g. multi-layer board Towel holder (e.g. Hilti HDD) wedi Tools reinforcement tape Expansion plug Shelf Wall Fastening behind ceramic. wedi Tools connector 90° Connection of two building boards with an angle of 90°. wedi Tools connector wall Fastening of building board structure to a wall. 30 wedi Tools connector 180° Load-bearing capacity and exemplary use of wedi Tools connector 180°. wedi system components:...

Reinforcement board Installation of reinforcement boards Reinforcement boards can be integrated into the wedi building boards to further stabilise the wall and oor surfaces. Only a few steps are required to grant additional stability for heavy objects such as shelves, towel holders or radiators. wedi system components: • Mark the exact position for the reinforcement board. Cut the marked area by using a router. The depth depends on the thickness of the reinforcement board. The adhesive adds further 2 mm. wedi building board wedi 610 adhesive sealant Bond reinforcement board ush-mount by using...