Cullamix tyrolean
2Pages

Tyrolean and rubbed-tyrolean finish cullamix tyrolean Uses ● Suitable for internal or external use ● Suitable for most environments coastal, town suburban and rural ● Suitable substrates: Externally weberend OCR; traditional cement rendering; fair faced concrete; exterior grade composition and cement boards; About this product cullamix tyrolean is a white or coloured cement based mix, which tyrolean coloured cement pro decorative protective r . provides a decorative and protective finish. It is applied by hand or power operated machines and provides an open honeycomb textured opera pro honey textured (Tyrolean) finish. yrolean) This list is not exhaustive and other smooth, flat surfaces may be considered. In addition, brickwork and blockwork may be coated where the joints will be accepted as a feature. The substrate must show some suction to achieve the cullamix tyrolean texture. Constraints Do not apply to gypsum plaster or previously painted surfaces. Features and benefits Technical data cullamix tyrolean is a cementitious finish; BS 5262 Code of practice for external renderings, and BS 8000-10 Workmanship on building sites. Code of practice for plastering and rendering, should be followed at all times. Suitable specification clauses for dealing successfully with most types of substrates are available from our Technical Services Department. ▲ Pre-blended – requires only the addition of clean water on site ▲ Durable and weather resistant ▲ Through coloured – requires minimal maintenance and no subsequent painting ▲ Suitable for most environments: coastal, suburban and rural Colours cullamix tyrolean is available in a range of 6 colours which can be viewed on our website www.uk.weber. Whenever possible, please obtain samples prior to specification. Note: As with all batch-made materials an exact colour match cannot alwa

cullamix tyrolean Preparation All surfaces must be sound, clean, dry and free from any material which may impair adhesion. Rendering should be of good alignment, finished with a wood or plastic float and unkeyed. Scaffolding must be independently tied to allow for an uninterrupted application. Any faults in the structure, particularly those which may lead to moisture penetration must be rectified. To avoid dampness and discolouration external finishes should be avoided below DPC or within 150 mm of ground level. Mask around the areas where material is to be applied. Masking tape must be...