Alpine
2Pages

{{requestButtons}}

Catalog excerpts

Alpine - 1

White travertine finish alpine Uses • Enhances the protection of a traditional rendering system • Suitable for external or internal use • Ideal for application onto primed weberend OCR or other cement based render Constraints Do not apply to gypsum plaster or previously painted surfaces. About this product alpine finish is a white cement based mix containing aggregates that provides a decorative travertine finish. Technical data Suitable specification clauses for dealing successfully with most types of substrates are available from our Technical Services Department. BS 5262, Code of practice for external renderings, and BS 8000-10, Workmanship on building sites. Code of practice for plastering and rendering should be followed at all times. ▲ Excellent weather resistance and durability ▲ Low maintenance white finish ▲ May be over-painted when dry with a suitable masonry paint if required ▲ Easy and quick to apply ▲ Simple to finish

Open the catalog to page 1
Alpine - 2

alpine Preparation All surfaces must be sound, clean, dry and free from any material which may impair adhesion, and lightly floated to provide key. Scaffolding must be independently tied to allow uninterrupted application. Any faults in the structure, particularly those which may lead to moisture penetration, must be rectified. To avoid dampness and discolouration rendering should be avoided below DPC or within 150 mm of ground level. All surfaces must be suction free to ease application and texturing as well as accentuating the whiteness of the material. For this purpose, prime the surface...

Open the catalog to page 2

All Weber catalogs and technical brochures

  1. Weberend MPR

    2 Pages

  2. Webersil P

    2 Pages