1. Catalogs
  2. Weber Industries
  3. mortier de CIMENT GRIS
video corpo

mortier de CIMENT GRIS

mortier de CIMENT GRIS

mortier de CIMENT GRIS

Product catalog summary
Product Overview: The document details a grey cement mortar suitable for general masonry work. It can be mixed with sand and aggregates and is available in 5 kg bags.
Usage Domain: Suitable for all standard masonry tasks.
Limitations: Should not be applied on plaster surfaces.
Safety Precautions: Follow safety advice on the packaging to protect health and the environment. Safety data sheets are available online.
Application Characteristics: Initial setting time at 20°C is 3 hours and 5 minutes, with an application duration of 2 to 3 hours.
Composition: Made of cement and ultra-fine sand.
Performance: Compressive strength values are 25 MPa at 1 day, 39 MPa at 2 days, 55 MPa at 7 days, and 63 MPa at 28 days. These values are indicative and may vary based on application conditions.
Recommendations: Do not apply in rain, on frozen or thawing surfaces, or when there is a risk of freezing within 24 hours. Avoid application under strong sun or wind exposure. Clean tools and hands with water before drying.
Surface Preparation: Surfaces must be sound, clean, cohesive, dust-free, and free of laitance or grease. Moisten the surface before application without making it dripping wet.
Application Conditions: Temperature range from +5°C to +30°C.
Application Process: Prepare, clean, and moisten the surface. Mix the cement mortar with sand and/or aggregates. Pigments can be added during mixing for coloring.
Practical Information: The product is sold in 5 kg bags and has a shelf life of 18 months if stored in original unopened packaging away from moisture. The color is grey. Tools required include a trowel and a trough. Consumption varies based on use, with specific ratios for mortar and concrete mixes.
See more

Catalog excerpts

mortier de CIMENT GRIS-1

mortier de CIMENT GRIS Mortier de Ciment pour tous travaux courants de maçonnerie DOMAINE D’UTILISATION • ous travaux courants de maçonnerie t LIMITES D’EMPLOI • ne pas appliquer sur un support en plâtre PRÉCAUTIONS D’UTILISATION • our utiliser ce produit en toute sécurité, afin de protéger p votre santé et l’environnement, respectez les conseils de prudence qui sont étiquetés sur l’emballage • les consignes de sécurité pour un emploi sûr de ce produit sont disponibles dans la Fiche de Données de Sécurité (FDS), accessible sur www.quick.fds/weber • les informations relatives aux dangers des produits figurent à la rubrique Sécurité Produits CARACTÉRISTIQUES DE MISE EN OEUVRE • ébut de prise à 20°C (selon EN 196-3): 3h05 d • durée d’application : 2 à 3 heures PRODUITS Multi-fonctions : travaux de maconnerie, scellements, joints… Se mélange avec du sable et/ou des agrégats. IDENTIFICATION Composition : ciment, sable ultra-fin PERFORMANCES résistances en compression (selon EN 196-1) Durée Ces valeurs sont des ordres de grandeur d’essais en laboratoire. Elles peuvent être sensiblement modifiées par les conditions de mise en œuvre. RECOMMANDATIONS • ne pas appliquer sous la pluie, sur support gelé, en cours de dégel ou s’il y a risque de gel dans les 24 heures ainsi que lors de très forte exposition au soleil ou au vent. • nettoyer les mains et les outils à l’eau avant le séchage PRÉPARATION DES SUPPORTS • les supports doivent être sains, propres, cohésifs, dépoussiérés et exempts de laitance ou de graisse. • humidifier le support avant application sans qu

 Open the catalog to page 1
mortier de CIMENT GRIS-2

APPLICATION 1 mise en œuvre : • Préparer, nettoyer et humidifier le support avant application • Mélanger le mortier de ciment avec du sable et/ou des agrégats • Il est possible de teinter le produit par rajout de pigments lors du malaxage INFOS PRATIQUES Unité de vente (produit) s ac de 5 kg Conservation 1 8 mois à partir de la date de fabrication en emballage d’origine non ouvert, stocké à l’abri de l’humidité. Couleur : gris Outillage t ruelle, auge les consommations varient selon l’utilisation du produit : selon consistance souhaitée selon consistance souhaitée Saint-Gobain Weber France 2/4...

 Open the catalog to page 2

All Weber Industries catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.