PU Injection Foam Resins • Junctions between cast in­situ concrete and precast units PU Injection Foam Resins • Semi­precast slab joints • Separation joints in buildings • Expansion joint tapes with stainless steel rails • Pipe ducts • Floor/wall connection Special properties • MR 1 : 1 • Elastic foam structure • Low expansion pressure • Reliable sealing • Adjustable reaction time (accelerator WEBAC B15 ) p. 20) ® Application by 1C pump: • Empty components A and B into a mixing vessel (make sure that the containers are completely empty) and mix homogenously Application by 2C pump: • No premixing required Exemplary applications Meaning of the icons WEBAC Product Catalog, www.webac.de or www.webac-chemie.com Sealing of semi-precast slab joints All the data indicated in this technical data sheet and any related information provided by our employees are of an advisory nature representing our current state of knowledge and in no way binding . As the exact chemical, technical and physical conditions of the actual application are beyond WEBAC‘s control, this information does not preclude examination of the products and/or procedures for the intended application and surface by the user . WEBAC is thus unable to guarantee results . The user is fully responsible for the observation of existing regulations and conditions when using the products . Sealing of pipe ducts All the data indicated in this technical data sheet and any related information provided by our employees are of an advisory nature representing our current state of knowledge and in no way binding. As the exact chemical, technical and physical conditions of the actual application are beyond WEBAC‘s control, this information does not preclude examination of the products and/or procedures for the intended application and surface by the user. WEBAC is thus unable to guarantee results. The user is fully responsible for the observation of existing regulations and conditions when using the products. © WEBAC-Chemie GmbH. Version 01/15

PU Injection Foam Resins Preparatory work Mixing Application Final work Cleaning Storage Occupational safety PU Injection Foam Resins Mixing ratio Apparent density of foam Density, 20 °C (ISO 2811) Processing life Special properties (WEBAC test specification following ISO 9514) Application temperature Building component and material Viscosity of mixture (WEBAC test specification following ISO 3219) Instruction for use Reaction time with 10 % water Start · End Mixing Expansion with 10 % water (EN 14406) Watertightness (EN 14068) • Junctions between cast in­situ concrete and precast units Values...

General Information WEBAC PU Injection Foam Resins PU injection foam resins (SPU) are designed for quickly and temporarily stopping water. They are characterized especially by their strong increase in volume and can also be used in case of highly pressing water, e.g. in dam building, tunnel construction, bridge building and special civil engi neering. The products are compatible with concrete, steel, foil, cable sheathing and WEBAC injection materials. WEBAC PU injection foam resins are resistant to salts, lyes and acids in concentrations usually found in buildings and structures. A secondary...

General Information WEBAC PU Injection Foam Resins To ensure durable limited-flexibility filling and sealing of cracks, a secondary injection with WEBAC PU injection resins is necessary depending on the object. Immediately after the injection of WEBAC PU injection foam resins, the secondary injection can usually be carried out via the same drill-hole packers. However, if the secondary injection is carried out several hours later it may be necessary to install new drill-hole packers in different positions. • Observe the technical data sheets of the injection pumps and cleaners used • Refer to...