HENRY Henry Exposed Floor Mounted Tub Filler With Handshower and Metal Cross Handles TECHNICAL DETAILS ADA Compliance: Yes Adjustable versus Fixed Spray: Fixed Spray Diameter of Head: 1 7/8" Diameter of Legs / Tubes: 1 9/16" Escutcheon Primary Material: Brass Fittings Hole Diameter: 1 1/8" Flow Restriction Options: 2.5, 2.0, 1.75, 1.5, 0.92 Handle Spread Maximum: 8" Handle Spread Minimum: 8" Handle Turn Angle: Quarter Turn Handshower / Spray Hose Length: 59" Depth / Width: 10 13/16" Height: 41 1/16" Inlet Connection Size: 3/4" Inlet Connection Type: Copper Sweat Inlet Supply Spread Maximum: 8" Inlet Supply Spread Minimum: 8" Installation Type: Freestanding Integrated Diverter: N Integrated Spray: N Number of Handles: Two Number of Holes: Two Hole Pivot: N Primary Material: Brass Spout Swivel: N Spray Included in Unit: N Suggested Application: Bath Valve Material: Ceramic Water Pressure Maximum: 85.0 psi Water Pressure Minimum: 20.0 psi Water Pressure Recommended: 45.0 psi SHOWN IN HENRY EXPOSED FLOOR MOUNTED TUB FILLER WITH HANDSHOWER AND METAL CROSS HANDLES| HNXT60 CODES & STANDARDS Influenced by the connection of industry and art Henry easily transitions between modern, traditional, utilitarian Code # HNTU60: Complies with ASME A112.18.1/CSA B125.1, CEC, ADA and 0.25% Weighted Average Lead Content. Certified with IAPMO, cUPC, NSF, CEC, DOE, State of MA and WRAS. PRODUCT FEATURES The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing. Brass material is used for components. Stocked in 2.5gpm (9.5 L/min) and 1.75gpm (6.6 L/min) for Handshower. State of California requires 1.75gpm (6.6 L/min) to comply with their water conservation requirements. Other flow options are available to order, contact your sales associate or call 1 (800) 899-6757 for details PRODUCT SUPPORT 800.927.2120 OPT 2 | WATERWORKS.COM

Henry Exposed Floor Mounted Tub Filler With Handshower and Metal Cross Handles PRODUCT SUPPORT 800.927.2120 OPT 2 | WATERWORKS.COM