Epoxy Matt Coat
2Pages

Protecting your premises since 1927 Epoxy Matt Coat A hardwearing matt finish epoxy resin floor coating Watco Epoxy Matt Coat is ideal for all heavily used areas and will withstand regular heavy traffic including forklift trucks. Durable and chemical resistant, it will protect and brighten concrete and make cleaning much easier. The matt finish also helps to reduce the appearance of imperfections in the floor surface • Very hard wearing with excellent resistance to oil, solvents and harsh cleaning chemicals • Ideal for all production and storage areas • Can be used over existing coatings • Contains a ‘user friendly’ epoxy resin for exceptionally easy application and long pot life • Virtually odour free - may be used in confined areas • Non flammable during application and non toxic when cured • Can be used on sand and cement screed or concrete with under floor heating systems (up to 30°C surface temperature) • Can be used on powerfloated floors with Watco Powerfloat Primer • Environmentally friendly – virtually zero VOC’s 11 Standard Colours Tile Red Light Grey 3 Premium Colours Cream Safety Yellow Royal Blue FREE tile samples are available on request While great care is taken with the colour samples shown, no guarantee can be given that they represent exactly the colours offered

Watco Epoxy Matt Coat Appearance Two coats on most surfaces will produce a tough, matt finish.Available in a wide range of colours. Storage It is important to store the pack at a temperature range of 20°C - 25°C for at least 8 hours prior to use. DO NOT ALLOW THIS PRODUCT TO FREEZE. Coverage Approximately 30m² per 5 litres per coat when applied by roller on average quality concrete. Two coats are normally required, but very porous surfaces may require further coats. Brush application will result in reduced coverage. Surface Preparation New Concrete Approximately ten days after laying, new...