Technical Data Sheet POWERFLOAT PRIMER Adhesion promoter for difficult surfaces DESCRIPTION AND USES Powerfloat Primer is a two-component, solvent free epoxy primer designed to improve the adhesion of coatings to hard, smooth surfaces. It can be applied to powerfloated concrete, quarry tiles, ceramic tiles and aluminum. Topcoat with most types of floor paint, however avoid using any topcoat which includes a strong solvent. This product is especially suited to Water-based Epoxy Coat and all Rust-Oleum Industrial Flooring epoxy coatings. It is also a suitable primer for our Concrete Floor Paint. For any other coating, we recommend a test for suitability. Please note: Although Powerfloat Primer will improve adhesion on difficult surfaces the characteristics of such surfaces can vary. For this reason a trial area should be applied to ensure that adequate adhesion can be achieved. COMPANION PRODUCTS J510001 - 18" Roller Frame and Handle J510002 - 18" Replacement Roller J510007 - Paint Mixer J510004 - 4" Paint Brush Flat finish

SURFACE PREPARATION The concrete surface must be clean, dry and free of loose material. New concrete should be allowed to cure for 28 days prior to coating. Remove oil, dirt, grease and other chemical contaminants by cleaning with detergent or other suitable cleaner. Rinse thoroughly. Existing coatings should be wellbonded and sound. Apply in a well ventilated area when the air and surface temperatures are between 50-85°F. Use a good quality lint free 3/8" nap roller with a phenolic core. A brush may be used for cutting in along walls. Avoid excessive film thickness. Compatible topcoats are:...