Technical Data Sheet SAFETY FRP RANGE Instant anti-slip surfaces for steps, ramps, floors, decking, vehicles DESCRIPTION AND USES COMPANION PRODUCTS A wide range of virtually indestructible slip resistant surfaces. The FRP range is based on an extremely durable fibreglass base with a resin bonded surface. All items preformed, just fix in place. Excellent slip resistance even in the wet. Step covers with high visibility nosing. Anti-slip sheets for use on ramps or around machinery. Use indoors and outdoors. Oil and chemical resistant. Will not rot or warp. Comprehensive range of standard sizes, all direct from stock. Attach by glue or screw. Ideal for wet or weak substrates which cannot be adequately prepared for paint. J580086 - Mastic Adhesive J510021 - Caulk Gun

SURFACE PREPARATION Very little preparation of the substrate is required. It should be reasonably clean and dry if only the Mastic Adhesive is used. Badly dished or holed concrete etc should ideally be filled. Mastic Adhesive will take up minor undulations and imperfections. Drill two holes at each end of the Step Cover, one approximately 5/8" in from the back edge and 1/2" in from the side. The second hole should be approximately 1/2" in from the side and on the line where the black tread meets the yellow or white nosing. It is unlikely that the Step Covers will require additional fixings in...