High Build Epoxy
2Pages

{{requestButtons}}

Catalog excerpts

High Build Epoxy - 1

Protecting your premises since 1927 High Build Epoxy Our glossiest, toughest epoxy resin coating Uses Showrooms, warehouses, production areas and any area where increased durability and high quality finish are important. Our highest performance roller applied two part epoxy resin floor coating. Provides a glossy, hygienic and easier to clean surface and is resistant to very heavy wear and a wide range of chemicals. • High gloss finish Only one coat is usually required, except on very porous surfaces which should be treated first with Watco 4-Hour Epoxy Primer. • Only one coat usually required • Excellent durability and chemical resistance • Solvent free formula, virtually odourless during application • High build formula, up to 200 microns thick in one coat • 100% solids epoxy resin formula Tile Red Light Grey While great care is taken with the colour samples shown, no guarantee can be given that they represent exactly the colours offered

Open the catalog to page 1
High Build Epoxy - 2

High Build Epoxy Appearance Watco High Build Epoxy cures to a hard gloss finish. Availability Available in 6 colours Watco High Build Epoxy is supplied as a 4.5 litre pack system. Coverage 18m2 per 4.5 litre pack maximum allowing for one coat by roller. Brush application may result in reduced coverage. Porous Surfaces To ensure a uniform finish and prevent bubbles caused by air entrapment, we recommend priming open textured or porous surfaces. Watco 4 Hour Epoxy Primer is ideal. This highly penetrative, solvent free primer seals open textured concrete and can be overcoated with High Build...

Open the catalog to page 2

All WATCO GmbH catalogs and technical brochures

  1. Rainshield

    2 Pages