Heavy Duty Anti Slip Traffic Paint
2Pages

{{requestButtons}}

Catalog excerpts

Heavy Duty Anti Slip Traffic Paint - 1

The UK’s leading direct supplier of industrial strength flooring products Heavy Duty Anti Slip Traffic Paint A hard wearing, anti slip traffic paint for external asphalt and concrete car parks Epoxy resin formula Tougher surface Longer lasting Fewer coats needed Watco Heavy Duty Anti Slip Traffic Paint is an easy to use, durable paint that will brighten drab areas of asphalt and concrete. It can be used for a variety of applications including frequently trafficked pedestrian areas, cycle lanes, car parks and vehicle access areas. It is not a road anti skid treatment. For internal areas please refer to Watco Anti Slip Traffic Paint. • A two part epoxy with a long pot life • One coat is usually sufficient Watco Heavy Duty Anti Slip Traffic Paint is based on a two-part epoxy compound with a hard aluminium oxide additive to give a fine texture which is strongly bound to both the coating and the substrate. • Suitable for asphalt, concrete or tarmac It contains a solvent which ‘bites’ into asphalt surfaces (without destroying them) and slightly penetrates concrete surfaces for the maximum possible adhesion without needing a primer. It has been formulated to be resistant to degradation by UV light. • Extremely durable for external applications • Finely textured for good slip resistance • Easily applied with a roller or brush Light Grey FREE tile samples are available on request While great care is taken with the colour samples shown, no guarantee can be given that they represent exactly the colours offered

Open the catalog to page 1
Heavy Duty Anti Slip Traffic Paint - 2

Watco Heavy Duty Anti Slip Traffic Paint Description A two-part epoxy resin coating which gives a hard wearing finish to external concrete, asphalt and other substrates. It contains a hard aluminium oxide additive to give a fine texture with good anti slip performance. Appearance Mid gloss, finely textured surface Availability Supplied as a two part pack of combined contents 5 litres, packed in a three-can system for ease of mixing. Coverage rate Approximately 15 to 20m2 per coat per 5 litres. However, coverage can be greatly affected by factors beyond our control and will be reduced on...

Open the catalog to page 2

All WATCO GmbH catalogs and technical brochures

  1. Rainshield

    2 Pages