Grip-Master & Grip-Master Rapid
2Pages

Protecting your premises since 1927 Grip-Master & Grip-Master Rapid Skid resistant surface for vehicle and heavily trafficked pedestrian areas Vehicle Grade Pedestrian Grade Watco Grip-Master and Watco Grip-Master Rapid are available in two grades, Vehicle Grade and Pedestrian Grade. Both offer a safer, highly visible, anti-skid surface. • Easily applied as one ‘high build’ coat • Solvent free formulation • Ideal on concrete, tarmac, asphalt, wood and flat steel • BBA assessed aggregate The Vehicle Grade aggregate is 1mm to 3mm and the Pedestrian Grade aggregate is 0.9mm to 1.3mm. Many uses Watco Grip-Master and Watco Grip-Master Rapid are ideal for use on footbridges, road bridges, car park ramps, station platforms, traffic calming areas, pedestrian zones, theme parks, boat decks, disabled parking spaces, barrier approaches, shopping precincts, vehicle and pedestrian circulation areas. Not recommended for use on steps. A heavy duty epoxy resin binder is applied to the substrate and the aggregate is broadcast by hand. Vehicle Grade Stone Pedestrian Grade Natural Grey Natural Grey FREE tile samples are available on request While great care is taken with the colour samples shown, no guarantee can be given that they represent exactly the colours offered

Watco Grip-Master & Grip-Master Rapid Watco Grip-Master Composition A three part pack comprising epoxy resin, hardener and graded aggregate. Textured aggregate finish available in 5 colours. Chemical Resistance Good resistance to oil, diesel and salt. Heat Resistance Do not use where the ‘in service’ temperature exceeds 45°C. Vehicle Grade - up to 2.5m2 per unit. Pedestrian Grade - up to 5m2 per unit. Coverage rates will be reduced on very coarse or open textured surfaces. Not recommended for use on steps. The product works by holding aggregate in resin. Problems can arise if the surface to...