Catalogs >
VULCAN >
FRYERS : 1VK45 SERIES

FRYERS : 1VK45 SERIES
2Pages

Catalog excerpts

FREE STANDING GAS FRYER 1VK45A: Solid state analog knob control behind the door. Accurate temperature control 200° to 390°F. User selectable fat melt modes. Electronic ignition. 1VK45D: Accurate temperature control 200-390°F with digital display. Fast recovery. Cook with compensating time or actual time. Electronic ignition. Digital temperatures: Fahrenheit or Celsius. Three melt modes. Two count down timers. Auto boil-out mode. 1VK45C: Programmable computer controls with digital character display. 10 menu timers display product name and cook times. Offline programming of menu items uploaded through USB interface, software included. Accurate temperature control 200-390°F with digital display. Fast recovery. Cook with compensating time or actual time. Electronic ignition. Digital temperatures: Fahrenheit or Celsius. Three melt modes. STANDARD FEATURES Model 1VK45C SPECIFICATIONS 45 - 50 lbs. capacity free standing gas fryer, Vulcan-Hart Model No. (1VK45A) (1VK45D) (1VK45C). 70,000 BTU/hr. input. Stainless steel cabinet. Set of four 6" adjustable casters (2 locking). Stainless steel fry tank with FivePass™ heat transfer system yielding 66% cooking and 78% thermal efficiency and “V” shaped cold zone. SoftStart™ ignition system using 35,000 BTU/hr. to extend oil life during start up. Idle rate of 4,251 BTU/hr. to maintain cooking temperature. 11⁄4" full port ball type drain valve. Twin fry baskets with plastic coated handles. Solid state analog knob control, digital, or programmable computer control systems all standard with electronic matchless ignition. Tank brush and clean-out rod included. Overall dimensions: 151⁄ 2"w x 343 ⁄ 8"d x 471⁄ 8"h. Working height 361⁄4". ■■ 70,000 BTU/hr. input. ■■ Maintains idle temperature setting with only 4,251 BTU/hr. to save energy. ■■ Energy saving SoftStart™ ignition system extends oil life while requiring lower BTU’s. ■■ Energy efficient FivePass™ heat transfer system yielding 66% cooking and 78% thermal efficiency. ■■ Stainless steel fry tank, 45 - 50 lb. capacity. Includes 10 year limited tank warranty. ■■ 11⁄4" full port ball type drain valve. ■■ Stainless steel cabinet. ■■ Set of four 6" adjustable (2 locking) casters. ■■ Twin fry baskets with plastic coated handles. ■■ Hi-limit shut-off. ■■ Electronic matchless ignition. ■■ Tank brush and clean-out rod. ■■ One year limited parts and labor warranty. ACCESSORIES FRYMATE-VX15 add-on frymate. Stainless steel tank cover – doubles as a work surface top. Connecting Kit(s) – Connects two fryers together (brackets, grease strip and hardware included). Single large basket – 13"w x 131⁄4"d x 51⁄ 2"h. Set of twin baskets – 61⁄ 2"w x 131⁄4"d x 6"h. 3 ⁄ " Flexible gas hose with quick disconnect. 4 10" high stainless steel removable splash guard. CSA design certified. NSF listed. SPECIFY TYPE OF GAS WHEN ORDERING Natural Gas. Propane Gas. SPECIFY ALTITUDE The 1VK45 Series fryer does not require any special adjustments for varying altitudes ranging from 0 - 10,000 feet for either Natural or Propane gas. OPTIONS Second year extended limited parts and labor warranty a division of ITW Food Equipment Group LLC

Open the catalog to page 1

FREE STANDING GAS FRYER INSTALLATION INSTRUCTIONS 1. A combination valve with pressure regulator is provided with this unit.Natural Gas 4.0" (102 mm) W.C. Propane Gas 10.0" (279 mm) W.C. 4. This appliance is manufactured for commercial installation only and is not intended for home use. 2. An adequate ventilation system is required for Commercial Cooking Equipment. Information may be obtained by writing to the National Fire Protection Association, Batterymarch Park, Quincy, MA 02269. When writing refer to NFPA No. 96. SERVICE CONNECTIONS: NEMA 5-15P 120 Volt cord & plug supplied with...

Open the catalog to page 2