VORT QUADRO EVO RANGE NEW

VORT QUADRO EVO RANGE Residential centrifugal extractor fans Suitable for wall/ceiling mounting or recessed installation; performance and fire resistance according to DIN 18017-3 standard. Ultra low noise levels perfectly compatible with night operation. High degree of protection (IP45), allowing safe installation in Zone 1 of bathrooms. Modular design: basic units can be combined to match a wide range of installation needs. High aeraulic efficiency, granting full compliance with Erp Reg. n° 1253/2014, 2nd Tier. Advanced electronic controls to satisfy a wide range of needs

Excellent sealing of backdraught shutter (TÜV Certified), to prevent the risk of bad smells and cold air diffusion when the product is switched off.

VORT QUADRO EVO RANGEResidential centrifugal extractor fans PRODUCT SPECIFICATION - • AC motor, shaft on ball bearings, granting continuous operation at least than 40.000 hours at max rated temperature. • Forward curved centrifugal impeller, PBT made, granting high rigidity, dimensional stability and great resistance to aggressive chemical agents. Its high efficiency, resulting from accurate aerodynamics studies, grant high pressure levels at nominal airflows. • Scroll, comprehending the electronic cardboard housing, made of self-extinguishing (V0) ABS. • Aesthetic front panel, made of self-extinguishing...

PRODUCT SPECIFICATION CASINGS 10 alternative casings, different for installation and fire protection. Integrated spigot (nominal diameters 80 mm) and a backdraught shutter. Frame to prevent entry of dirt and plaster at installation supplied with the product. Recessed casing External casing

VORT QUADRO EVO RANGEResidential centrifugal extractor fansRANGE - Modular concept allows to freely complete ventilation units and casing to match different needs. Vort Quadro Evo Range consists of 23 ventilation units, different for performances and features, and 10 casing, suitable for wall ceiling and flush mounting. Alternative levels of fire protection available. 10 casings, different for installation and fire protection grade 23 models different for electronic Suite (5) and level of performance (5) Consisting of motorfan, scroll, filter, filter frame, electronics and front panel. BASIC...

VENTILATION UNITS - TIMER VERSION (T) Same as Basic Verions, but with a Timer for delayed switch on/off. Switch or delay can be set at installation between 0-45”. Switch off delay between 0-20'. CODE MODELS DESCRIPTION 11526 QE 60 LL T 1 speed ai r volume 60 m3/h and timer 1 1528 QE 60/35 LL T 2 speeds air volumes 60/35 m3/h and timer 1 1527 QE 100 LL T 1 speed air volumes 100 m3/h and timer 11531 QE 100/60 LL T 2 speeds air volumes 100/60 m3/h and timer TIMER PRO VERSION (TP) Same as Timer Version, but: • Switch-on delay can be set at installation 0, 45”, 90” or 120”, switch-off delay at 6',...

VORT QUADRO EVO RANGEResidential centrifugal extractor fans VENTILATION UNITS TIMER EVO + HCS SENSOR (TP HCS) • Timer EVO mode: the on/off switching realized through the light switch; the on-board electronics allows to set at installation, the start/stop delay when the product is switched on/off (delays can be set at 0, 45”, 90” or 120” and at 6', 10', 15' or 21'). • HCS mode: the on/off switching is realized according to ambient relative humidity (RH) detected by the HCS sensor (Humidity Control System) integrated in the on-board electronics. The system operates with three different modes, to...

CASINGS Casings integrate a nominal 80 mm diameter spigot and a backdraught shutter. Casings are also provided with a frame to prevent entry of dirt and plaster. BASIC FOR INSTALLATION ON WALLS AND CEILINGS CODE MODEL DESCRIPTION of ABS plastic. Spigot made of ABS plastic, integrating the 11561 QE - B M backdraught shutter compliant with DIN 18017-3, as certified BASIC FOR INSTALLATION ON WALLS AND CEILINGS WITH FIREPROOF (CLASS K90), BACKDRAUGHT SHUTTER CODE MODEL DESCRIPTION 11563 QE - B M VK90 Basic encasement for surface (wall/ceiling) installation, made of ABS plastic. Stainless steel spigot,...

VORT QUADRO EVO RANGE Residential centrifugal extractor fans RECESSED MOUNTINGS RECESSED INSTALLATION FIREPROOF ENCASEMENT K 90, WITH FIREPROOF CLASS K 90 BACKDRAUGHT SHUTTER CODE Fireproof K90 casing for recessed installation and rear discharge. Stainless steel spigot, integrating the K90 fireproof valve, TUM certified according to DIN 18017-3. Backdraught shutter compliant with DIN 18017-3, as certified by TUV German Institute Spigot nominal diameter: 80 mm. Square frame to prevent entry of dirt and plaster. Fireproof K90 casing for recessed installation and side discharge. Stainless steel...

RESIDENTIAL VENTILATION 60 m3/h BATHROOM OR TOILETS 1 x 90° bend at flush mounted installation surface mounted installation INSTALLATION OF 1 UNIT PER FLOOR With 60 m3/h designed air flow volume and operation of all units at the same time. 1 x 90° bend at flush mounted installation surface mounted installation INSTALLATION OF 2 UNITS PER FLOOR With 60 m3/h designed air flow volume and operation of all units at the same time. Diameter of main riser in mm Example 1 Type of room: bathroom/toilet V = 60 m3/h Reference room height 2.75 m; straight ducting without bends; ducting lenght max. 1.5 m from...

VORT QUADRO EVO RANGE Residential centrifugal extractor fans 1 x 90° bend at flush mounted installation INSTALLATION OF 1 UNIT PER FLOOR surface mounted installation 1 x 90° bend at flush mounted installation With 100 m3/h designed air flow volume and operation of all units at the same time. (Volume e.g. = 100 m3/h. Second room ventilation with one unit = bathroom 60 m3/h, toliet 35 m3/h) Diameter of main riser in mm INSTALLATION OF 2 UNITS PER FLOOR surface mounted installation With 100 m3/h designed air flow volume and operation of all units at the same time. (Volume e.g. = 100 m3/h. Second...

TECHNICAL DATA Referred to Max, Mid, Min speed when available CODE MODELS V ~ 50 Hz SOUND LEVES SOUND PRESSURE* 1,5 m WALL MOUNTING RECESSED MOUNTING *Sound pressure calculated In free-field conditions, 1,5 m distance, emispheric distribution.