Design F. Trabucco & Associati VORT QUADRO RANGE VENTILATION AIR CONDITIONING AIR TREATMENT HEATING CENTRIFUGAL EXTRACTOR FANS FOR WALL/CEILING INSTALLATION AND FLUSH MOUNTING WITH OPTIONAL SIDE EXTRACTION NEW

3 STYLISH Modern, elegant and practical design - Air extraction on four sides of the appliance has enabled an especially attractive design. In addition, the bodywork is entirely made of anti-UV (no yellowing) ABS thermoplastic resin. Design F.Trabucco & Associati EASY Simple installation and maintenance greatly facilitated. Fitted with the 3 screws supplied, one for safety and two for fastening. SILENT More powerful yet quiter thanks to a new design of impeller which gives a significant reduction in noise (third party certified) and power consumption whilst producing an improved airflow ECO-FRIENDLY...

4 Air extraction on four sides

5 WALL/CEILING INSTALLATION The air is extracted laterally through an opening concealed beneath the outer cover and drawn from all around the product. Possible dust deposits are invisible from the outside whereas the outer cover remains perfectly clean. BACKDRAUGHT SHUTTER Integrally installed on the appliance, it prevents return air when the appliance is switched off. VERSATILE The decentralized hole of the air outlet enables installation in any corner (right or left). Quadro can be ducted to any spigot position by simply rotating the rear box of the unit. The grille will always remain in the...

6 Technical Specifications Vort Quadro products are also avilable with an adjustable, from 3 to 20 minutes, overrun timer. Vort Quadro range is also available with ball bearing motors for a minimum 30,000 hours operation without mechanical malfunction. The units turns on when relative humidity exceeds 65% and it turns back off when the RH drops back to 65%. When the light is switched off, the unit will continue to run from between 3 to 20 minutes depending on the timer setting. ACCESSORIES: Adapter for the diameter on the outlet, it is possible to fit the adapter supplied taking the diameter...

9 Vort Quadro I Range 9 MODELS WITH AND WITHOUT TIMER AND HUMIDOSTAT VORT QUADRO I cannot be fitted into a ceiling or a pannel.

10 Technical Specifications DIMENSIONS PRESSURE/PERFORMANCE CURVES Vort Quadro I products are also available with an adjustable, from 3 to 20 minutes, overrun timer. Vort Quadro I range is also available with ball bearing motors for a minimum 30,000 hours operation without mechanical malfunction. The units turns on when relative humidity exceeds 65% and it turns back off when the RH drops back to 65%. When the light is switched off, the unit will continue to run from between 3 to 20 minutes depending on the timer setting. ACCESSORIES: Adapter for the diameter on the outlet, it is possible to...

The description and illustrations in this catalogue are understood to be indicative and are not binding.Vortice reserves the right, while not changing the essential characteristcs of the models described and illustred, to modify products whenever necessary and without warning. www.vortice.com www.vortice-france.com www.vortice.ltd.uk Cod. 5.170,084.895 04/05 INTRODUCING THE COMPLETE RANGE OF VORTICE CENTRIFUGAL FANS Vortice France 72, Rue Baratte-Cholet 94106 Saint Maur CEDEX Tél. (+33) 1.55.12.50.00 Fax (+33) 1.55.12.50.01 France [email protected] Vortice Elettrosociali S.p.A Strada...