DAMP-PROOF AND ANTI-CONDENSATION RESTORATION EMULSIONS AND BARRIER AGAINST RISING DAMP TRIPLEZERO-T PRODUCT DESCRIPTION TRIPLEZERO is a creamy emulsion, ready to use, super hydrophobic, non-toxic which, thanks to its immediate water-resistant action, protects walls subject to phenomena of water absorption. PRODUCT APPLICATION Protective water-resistant layer on porous surfaces such as solid bricks, tufa, stone or rock. • Easy and quick application • Immediate water resistance effect • Suitable for both indoor and outdoor application • Effective and long-lasting transparent protection • It does not alter the breathability of the surfaces • Excellent resistance against ageing agents such as UV rays, un/freezing, marine aerosol • Odourless and solvent-free Preparing the surfaces Remove the parts that have deteriorated or coming off Completely remove efflorescence and dust in general by sanding or brisk brushing. If efflorescence is very obvious, wash with a water and hydrochloric acid solution (1 litre every 40 litres of water). Then rinse and leave to dry for a few days. Repeat the above-mentioned operations should salts reappear. TRIPLEZERO-T is ready to use; mix well before use. Application TRIPLEZERO-T is ready to use and does not require any dilution, accordingly, prior to use it is only necessary to mix the emulsion well in its container. Apply an even layer on dry surfaces with a brush, roller or airless machine. With manual application a single coat applied by brush or roller is sufficient. With airless machines we recommend two consecutive cross applications. It is preferable to use an airless piston machine, and for additional information contact the Volteco technical service.

DAMP-PROOF AND ANTI-CONDENSATION RESTORATION EMULSIONS AND BARRIER AGAINST RISING DAMP Consumption can vary between 100 and 400 g/m² based on the porosity of the surface. 5 kg and 15 kg pot. The packages must be stored in a dry area protected from sunlight and humidity with temperatures no less than +5°C. WARNINGS - IMPORTANT NOTES With walls subject to rising damp, perform the injection treatment at the foot of the wall before the protective treatment. It is advisable to carry out a test application on a small surface area to determine product consumption and to evaluate any change in colour....