Catalogs >
VOLTECO >
PLASTIVO 300

PLASTIVO 300
5Pages

Catalog excerpts

LIQUID-APPLIED WATERPROOFING ELASTIC SYSTEMS PLASTIVO 300 PRODUCT DESCRIPTION Elastic waterproofing product, to create a cement-based coating suitable for applications in positive and negative pressure on concrete surfaces or cement blocks, mixed masonry duly smoothed with waterproof VOLTECO mortars. It is particularly suited for indoor and/or very humid applications, and is also effective as a barrier against carbonation. It fulfils the limits of Directive No. 2004/42/EC (DECOPAINT) of the European Parliament and Council concerning the limitation and emissions of Volatile Organic Compounds (VOCs). PRODUCT APPLICATION Positive and negative hydrostatic pressure waterproofing of structures made of concrete, cement blocks or mixed masonry, previously levelled with suitable VOLTECO mortars, affected by moderate settlements and/or movements. Particularly suited for indoor and/or very humid environments such as: • Underground rooms in general, garages, cellars, lift pits, lightwells, tanks and channels • Balconies, porticoes, wells, side-walks and screed in general • Bathrooms, showers, saunas, etc • Odourless • Easy and quick application • Applicable by brush or roller • Excellent impermeability with negative hydrostatic pressure up to 0,5 atm • Elastic up to -5°C • Adheres to different types of surfaces (concrete, brickwork, brick, gypsum board, plastic, metal, ceramic, polystyrene, wood, other) • Product application is not affected by low temperatures (≥ +5°C) • Complete waterproofing cycle within one day • Anticarbonation protection with ”barrier” function Preparing the surfaces Verify the structure suitability for the hydrostatic loads; if intended to contain water, perform a preload test. Remove any dirt, oil, paint and any material or deposit that could compromise adhesion of PLASTIVO by pressure blasting, sandblasting or bush-hammering lightly.

Open the catalog to page 1

LIQUID-APPLIED WATERPROOFING ELASTIC SYSTEMS PLASTIVO 300 The surface that is to be treated must be solid and perfectly clean from cement slurry. Repair the surface with suitable VOLTECO mortar if the surfaces are very uneven, have gravel nests or in the case of mixed masonry. If the surfaces are old and/or dusty or partially soaked with water, apply PROFIX 30 or PROFIX 60 primer (see the related technical data sheets) with a roller, a brush or by spray, ensuring it does not bleed on the surface. Construction joints, spacers, cracks and joints (positive hydrostatic pressure) Connect the...

Open the catalog to page 2

LIQUID-APPLIED WATERPROOFING ELASTIC SYSTEMS PLASTIVO 300 Finishing The product can be finished with PAINT FLOOR or PAINT POOL (see the related technical data sheets) or ceramics, depending on the intended use. Ceramics must be laid with a large grout gap and C2-type adhesive (preferably with an S1 and S2 deformation class). The subsequent finishing plaster must be applied with CG2 class sealant cement-based mortar. When applied indoors, it is recommended to coat the walls with the macroporous CALIBRO as an anticondensation layer. It is also possible to finish with X-LIME once the CALIBRO...

Open the catalog to page 3

LIQUID-APPLIED WATERPROOFING ELASTIC SYSTEMS Carbon dioxide permeability Test method Crack Bridging Ability Crack Bridging Ability (product + Flexonet mesh) Declared performance (*) Certified performance (**) - Test method Performance requirements Declared performance (*) Crack Bridging Ability (+23°C) Crack Bridging Ability (-5°C) Crack Bridging Ability (+23°C)(product + Flexonet mesh) Crack Bridging Ability (-5°C)(product + Flexonet mesh) Initial adhesion Adhesion after immersion in water Adhesion after heat application Adhesion after un/freezing cycles Adhesion after immersion in...

Open the catalog to page 4

LIQUID-APPLIED WATERPROOFING ELASTIC SYSTEMS Via delle Industrie, 47 - 31050 Ponzano Veneto (I) Via delle Industrie, 47 - 31050 Ponzano Veneto (I) 11 0004-CPR-2014-10-01 EN 1504-2:2005 PLASTIVO 300 Protection systems of the concrete surface. Coating against the risks of penetration (PI), humidity control (MC) and increased resistivity (IR) PLASTIVO 300 Cement-based liquid waterproofing product modified with polymer (CM 01) for outdoor applications and in pools under ceramic tiles(applied with class C2 adhesive in compliance with EN 12004) Reaction to fire: Class B-s2,d0 Water vapour...

Open the catalog to page 5