Catalogs >
VOLTECO >
AQUASCUD SYSTEM 430

AQUASCUD SYSTEM 430
4Pages

Catalog excerpts

LIQUID-APPLIED WATERPROOFING ELASTIC SYSTEMS AQUASCUD SYSTEM 430 PRODUCT DESCRIPTION AQUASCUD System 430 is a patented waterproofing system, offering a definitive solution and without having to resort to demolition, for balconies, terraces, roof decks and all flat surfaces, even with flooring installed. It is a waterproof protective shield against possible causes of infiltration. Quick, practical and extremely elastic, it is a definitive solution to cutting costs and inconvenience. AQUASCUD System 430 consists of: AQUASCUD 430, elastic two-component cement-based waterproofing compound; AQUASCUD BASIC: elasticised microporous water-repellent polypropylene membrane, which is roughened thanks to special processing, allowing perfect adhesion to the waterproof coating; AQUASCUD JOIN, elasticised joint band; AQUASCUD System 430 meets the requirements stipulated by ETAG 005 part 1 and part 8 for waterproofing kits for flat roofs and has obtained Technical Approval ETA 11/0362 issued by ITCCNR. PRODUCT APPLICATION Waterproofing of flat roofs, balconies, terraces and sloped floors, with flooring already installed, with waterproofing surface that can remain exposed. • Applicable on existing floor and surfaces with micro-cracks • No demolition and disposal • Definitive intervention with a thickness of just 3 mm, thanks to its adherence to every type of surface • UV-resistant • It maintains deformability to -10°C • Excellent protection of screed against the action of un/freezing and efflorescence • Easy and quick application Preparing the surfaces Remove all dirt and any other material that could compromise adhesion of AQUASCUD. Repair the surface with suitable VOLTECO mortar if the surfaces are very uneven, have gravel nests or in the case of mixed masonry. If the surfaces are old or dusty, apply PROFIX 30 primer (consumption of 0.2÷0.3 l/m²) with a roller, a brush or by spray, ensuring it does not bleed on the surface due to the surface not absorbing it. With surfaces that are partially water-soaked, with a relative surface humidity of no more than 8% (measured with a Storch electric hygrometer) apply a single coat of PROFIX 60 primer (see relative

Open the catalog to page 1

LIQUID-APPLIED WATERPROOFING ELASTIC SYSTEMS AQUASCUD SYSTEM 430 data sheet) with brush or roller. Preparation of installation parts and set-ups • EXPANSION JOINTS Any expansion joints on the surface must be covered with GARVO joint cover strip (see related technical data sheet) which, with structural expansion joints, needs to be omega shaped and glued on the sides with AQUASCUD mixture • CORNERS and CONNECTIONS Set the connections up with drains using the relative DRAIN MANIFOLD Connect all of the wall/floor corners with AQUASCUD JOIN joint band, placing the rubber-coated part in contact...

Open the catalog to page 2

LIQUID-APPLIED WATERPROOFING ELASTIC SYSTEMS AQUASCUD SYSTEM 430 Special parts available: GARVO 90° angle - GARVO 270° angle - DRAIN/EXHAUST MANIFOLD SQUARE GARVO – AQUASCUD CORNER angle 90° and AQUASCUD FIXY joints. Availability of tools for application: NEEDLE ROLLER - NOTCHED FLOAT - NOTCHED SQUEEGEErubber SQUEEGEE The product must be stored in a dry place without being exposed to frost and heat (maximum temperature: 40°C) or direct exposure to the sun before being applied. WARNINGS - IMPORTANT NOTES Do not add water to the mixture or alter the mixing ratio. The product must be used...

Open the catalog to page 3

LIQUID-APPLIED WATERPROOFING ELASTIC SYSTEMS AQUASCUD SYSTEM 430 VOLTECO S.p.a 1305 Via delle Industrie, 47 - 31050 Ponzano Veneto (I) 11 0017-CPR-2013/07/01 ETAG 005 Part 1 and Part 8 AQUASCUD SYSTEM Liquid applied roof waterproofing kit Reaction to fire: Class E Expected lifetime: W2 (10 years) Climatic zone: A “Severe climates” Load: P1 (low) Roof slope: S1-S2 Minimum surface temperature: TL2 (-10°C) Maximum surface temperature: TH2 (+60°C) External fire performance: NPD Slipperiness: NPD Minimum coat thickness: 1.8 mm Hazardous substance release: none © Copyright Volteco SpA - All...

Open the catalog to page 4