Catalogs >
VOLTECO >
AKTI-VO 201

AKTI-VO 201
1 / 2Pages

Catalog excerpts

JOINT COVERS, PROFILES FOR JOINTS AND ACCESSORIES AKTI-VO 201 PRODUCT DESCRIPTION High-performance hydro-expansive mastic for definitively sealing and waterproofing passing bodies and cracks in general. It is the most effective, resolutive solution, through direct intervention on the water flow point. PRODUCT APPLICATION • To seal damage to reinforced concrete structures due to shrinkage • To seal concrete, metal and plastic pipes embedded into the concrete • To create seals between prefabricated elements • Watertight construction joints in reduced section structures • To level surfaces and seals at the ends of the Adeka KM profiles • Resolutive intervention on existing structures • Also applicable on wet and very uneven surfaces • It can support significant loads of water • Easy and quick to use AKTI-VO 201 cartridge produces a 3.20 m seal (10x10 mm). Clean the surface from any dust, loose parts and any other material that could compromise the adhesion of AKTI-VO 201. Cut the tip of the cartridge according to the size of the curb to be applied along the engraved lines and then pierce the inner protection of the tip with a punch. Load the cartridge into the gun and extrude AKTI-VO 201. To seal cracks, place AKTI-VO 201 precisely on the line where the crack is made (see drawings), then confine AKTI-VO 201 with a thickness of at least 5 cm of SPIDY 15/FIBROMIX 40, or TAP 3 when applying in the presence of water.

Open the catalog to page 1

JOINT COVERS, PROFILES FOR JOINTS AND ACCESSORIES PACKAGING AND STORAGE 320 cc cartridge. The products must be stored in a dry place protected from sun and humidity.

Open the catalog to page 2