colofer® REVERSE

Product catalog summary

Introduction
colofer® REVERSE is an organic-coated steel strip designed for enhanced protection and tailored to specific applications. It offers a protective coating on the back side, available in standard and alternative thickness options, and is compatible with foams and adhesives.

Specifications

Coating Thickness: Approximately 10 µm, as per EN 13523-1.
Color: Standard RAL 9002, with other shades available upon request (EN 13523-3).
Gloss: Approximately 40 at 60° (EN 13523-2).
Adhesion: ≤ 2 T peel adhesion after bending (EN 13523-7).
Temperature Resistance: From -20 to +80 °C, with no delamination on even surfaces during the guarantee period.
Humidity Resistance: No blister formation after 500 hours of continuous humidity testing (EN 13523-25).
CPI Category: CPI 2 on Z275 or ZM120, otherwise CPI 1 (EN 10169).
Surface Appearance: Smooth.
Fire Classification: A1 (EN 13501-1).
Foam Adhesion: Available upon request (EN 13523-20).

Additional Information
All testing standards are based on the latest versions unless specified otherwise. The data reflects current knowledge and experience, with potential slight deviations due to color and sheet thickness variations. For the most accurate and updated information, refer to the online data sheets.

Disclaimer
The information provided is for technical orientation and does not replace personalized advisory services. Product characteristics are not guaranteed unless specified in a contractual agreement. Technical changes may occur, and errors and misprints are excepted. Reproduction of this material requires written permission from voestalpine Stahl GmbH.

Catalog excerpts

Organic-coated steel strip colofer® REVERSE data sheet | Page 1/2 | 11/2018 colofer® REVERSE More than just back-side protection colofer® REVERSE is specially adapted to each individual application. The coating meets important material requirements in addition to its protective effect. Convincing advantages: »» Standard 10 µm option »» Alternative 12 µm option »» Suitable for foams »» Suitable for adhesives The back side is coated with a single layer of colofer® REVERSE for extra protection. Our colofer® technical support consists of a large pool of experts who will be happy to assist you with all your inquiries. voestalpine Steel Division www.voestalpine

Open the catalog to page 1

colofer® REVERSE data sheet | Page 2/2 | 11/2018 colofer Properties Testing standard/inspection requirement 1) No delamination of coating on even surfaces throughout guarantee period for coating adhesion. Color shades will change as a result of long-term stress at high temperature.

Open the catalog to page 2

All Voestalpine catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list