HeadLine Mario und Claudio Bellini, 2005 HeadLine not only provides optimal support in the lumbar zone, but also targets vulnerable areas that have previously been neglected – the shoulders, neck and head. In this way, it fulls the ergonomic requirements of modern oce work. In an upright sitting position, the head and spine are naturally balanced. But when the sitter leans back, most conventional oce chairs do not provide sucient support, resulting in strain and tension in the neck and shoulders. HeadLine Management Chair Chair HeadLine Management Chair Oce swivel chair according to EN 1335, Oce swivel chair according to EN 1335, Ergonomic Seal of Approval (LGA Nuremberg). Ergonomic Seal of Approval (LGA Nuremberg). Version with die-cast aluminium spine complies Complies with BS 5459-2 (24-hour test). ∏ Synchronised mechanism: individual adap- ∏ Synchronised mechanism: individual adaptation of backrest resistance. The mechanism can be locked in the upright sitting position. Adjustable seat depth as a standard feature. ∏ Backrest and seat: the suspended const- tation of backrest resistance. The mechanism can be locked in the upright sitting position. Adjustable seat depth as a standard feature. ∏ Backrest and seat: the suspended construction of the back enables the backrest and integrated headrest to adapt perfectly to integrated headrest to adapt perfectly to the body, movements and sitting position of the body, movements and sitting position of HeadLine solves this problem: the exible, elongated backrest hangs from articulated joints at the support points for the lower back and neck. In the upright position, primary support is given to the lumbar zone. When the sitter leans back, the shoulders sink into the back panel and the upper backrest extension tilts forward to support the head. This eectively prevents muscle strain in the neck and shoulder areas, and the sitter‘s viewpoint remains horizontally focused on the monitor in the reclined position rather than shifting toward the ceiling. ruction of the back enables the backrest and the user. Spine elements in polished die-cast the user. Spine elements in polished die-cast aluminium. The height of the lumbar support aluminium or plastic (basic dark). The height of the lumbar support can be adjusted to user’s back. Seat and backrest upholstery t the contour of the user’s back. Seat and in polyurethane foam, more thickly padded backrest upholstery in polyurethane foam. than HeadLine oce chair. Perforated lea- Skin, a 3D spacer fabric used for the seat ther cover provides air circulation. and backrest, and the integrated patented Clima Seat provide thermal comfort for prolonged periods. Headrest hood for the upper ∏ Armrests: height adjustable, with comfortable polyurethane foam pad, leather cover. ∏ Base: ve-star base in polished die-cast backrest extension is replaceable (in leather aluminium with double castors (Ø 60 mm, basic dark). ∏ Armrests: height adjustable, with comfortable polyurethane foam pads, optional leather cover. Optional 3D armrests with polyurethane pads in basic dark. HeadLine is complemented by the HeadLine Management Chair, a model for executive demands. ∏ Base: ve-star polyamide base in basic dark or polished die-cast aluminium base with double castors (Ø 60 mm) in basic dark.

DIMENSIONS (measurements are established pursuant to EN 1335-1) HeadLine, with armrests HeadLine, without armrest light grey basic dark aluminium polished Cover, Skin Cover, perforated leather Article. No. 09150102 Vitra can be found around the globe. To nd a Vitra partner in your area, go to www.vitra.com.