VITEX ECO
2Pages

VITEX ECO Ecological antimicrobial emulsion paint Premium quality, ecological-antimicrobial paint for interior use. It is certified by the Greek Council for Ecolabel Awards (ASAOS) and fulfills the criteria of the European Union Ecolabelling Board (EUEB) and by the Industrial Microbiological Services Ltd Registered in England for antimicrobial and hypoallergenic effect according to BS 3900 (Part G6) and ISO 22196 : 2007. It is virtually odourless during its application because it does not contain ammonia or other dangerous substances, such as aromatic hydrocarbons, free formaldehyde, heavy metals or alkylphenolethoxylates. Vitex Eco provides great hiding power, unrivalled performance, exceptional whiteness and durability to frequent washing and atmospheric weathering. It can be applied to properly prepared surfaces of any material. • • • • Ecological Antimicrobial - Hypoallergenic Durability to frequent washing Precision at shades SPECIAL USES Vitex Eco, due to its special formulation prevents the growth of microbes (bacteria, fungi) in the film of paint, so it’s ideal for painting areas with extra hygienic and aseptic conditions like children’s rooms, hospitals, maternity clinics, surgical clinics, doctor’s practices, schools, kindergartens, gyms, food storagehouses, hotels etc. COLOURS Available in white and unlimited number of shades through Vitex’s Colorfull Tinting System. PACKAGING White SPREADING RATE 10-12 m2/L according to ISO 6504-1 per coat on properly prepared surfaces. VOC (Volatile Organic Compounds) CONTENT EU maximum VOC content limit values (Directive 2004/42/CE) for this product (category A/a “Interior matt walls and ceilings (Gloss<25@60ο)”, Type WB): 30 g/L. This product contains maximum 14,5 g/L VOCs (ready for use). SURFACE PREPARATION Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint. To fill any cracks or holes use Acrylic Putty or Visto. Surfaces previously covered with water paints or distempers (lime wash or ceiling white) should be primed with Acrylan Unco Eco. New surfaces made of plaster, concrete, cement, plasterboard, etc. should be first primed with Acrylan Unco Eco or Blanco Eco. Surfaces stained from smoke, graffity, coffee or any other kind of stain should first be primed with Blanco Eco. APPLICATION Stir well before use. Apply two coats by roller, brush or airless spray gun diluted up to 10% with water. Do not apply at temperatures below 5οC, above 35οC and/or relative humidity above 80%. It is touch-dry after 30-60 minutes and can be recoated after 3-4 hours. Drying time depends on weather conditions (humidity and temperature). After application, seal the pail and store it in temperatures between 5οC and 35οC for future use. Allow at least 3 weeks before cleaning and washing newly painted surfaces with Vitex Eco. Wash gently with water using a soft sponge. In case of bad stains, use a mild colourless detergent or soapy water. Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent. Do not dispose of liquid waste into ground water table. Unused paint requires special handling for safe disposal. Advice regarding disposal and collection should be sought fro

VITEX ECO Ecological antimicrobial emulsion paint TECHNICAL CHARASTERISTICS Viscosity STORAGE Containers must be kept closed in a cool, dry, well ventilated area protected from direct sunlight at temperatures between 5οC - 38οC. SAFETY ADVICE Read label before use. For further instructions - precautions see Material Safety Data Sheet. For more information as to why this product has been awarded the Flower please visit the web-site: http://ec.europa.eu/environment/ ecolabel Τ.Θ. 139 Ημερος Τόπος, Ασπρόπυργος Τ.Κ. 193 00 P.O. Box 139 Imeros Topos, Aspropyrgos GR 193 00 T. + 30 210 5589 500,...