Catalogs >
VITEX >
Verolac

Verolac
1 / 1Pages

Catalog excerpts

VerolacHigh durability gloss enamel paint TECHNICAL CHARASTERISTICS SPREADING RATE 14 - 16 m2/L per coat on properly prepared surfaces. VOC (Volatile Organic Compounds) CONTENT EU maximum VOC content limit values (Directive 2004/42/CE) for this product (category A/i "One-pack performance coatings", Type SB): 500 g/L. This product contains maximum 495 g/L VOCs (ready for use product). SURFACE PREPARATION Surfaces should be cleaned with Brush Solvent T 300, be smooth and dry, free from dust, grease or rust and sanded. Metallic surfaces should be coated with an anticorrosive primer (Anti-Rust Primer, Minio New Type or Metal Primer). Glossy metallic surfaces (aluminum, galvanized steel etc) should be first coated with Primer for Glossy Surfaces or Wash Primer. APPLICATION Stir well before use. Apply two coats by roller or brush diluted up to 5% with Brush Solvent T 300 or airless spray gun diluted up to 5% with Spray Gun Solvent T 350. Do not apply at temperatures below 5oC, above 35oC and/or relative humidity above 80%. It is touch dry after 2-3 hours and can be recoated after 20-24 hours. Drying time depends on weather conditions (humidity and temperature). Allow at least 30 days before cleaning and washing newly painted surfaces with Verolac. Clean rollers, brushes, floor stains, etc. with Brush Solvent T 300 and then with soapy water or detergent. Use Spray Gun Solvent T 350 to clean spray guns.

Open the catalog to page 1

Verolac 1 / 1Pages

Catalog excerpts

All VITEX catalogs and technical brochures

Verolac
1 / 1Pages