Insulated Panel Applying polyurethane foam to the panel profiles provides additional support for condensation control, as well as heat and sound insulation. GUTTER SEAL Maximum insulation between the panels and the gutter is achieved through sealing gaskets placed within the gutters on all four sides of the system, which engage once the panels are fully closed. Standard Panel The internal chambered design of the panels supports thermal and acoustic insulation. The specially shaped panels open through a single-point movement, allowing both natural lighting and ventilation. This motion is enabled by lifting the profile to which the panels are connected, using a high-pressure piston motor system. 110° MOVEMENT SKYTEKS Roll ˜s a movable roof system cons˜st˜ng of panels that move at an angle of 110 degrees on ˜ts own ax˜s thanks to ˜ts spec˜al des˜gn. Wh˜le th˜s movement prov˜des amb˜ent vent˜lat˜on, ˜t also allows for opt˜mal shad˜ng accord˜ng to the angle of the sun. TIGHTNESS CLOSURE OPTIONAL LIGHTING An optional LED lighting system is specially integrated into the panels to enhance visual appeal and nighttime usability. VENTILATION AND INSULATION Fully lifted panels operated by piston mechanisms provide maximum ventilation. During winter conditions, effective airflow is maintained even when the panels are positioned at a 10-degree angle, ensuring continuous ventilation witho