VIKING OUTDOOR KITCHEN PLANNING GUIDE
27Pages

2 0 1 1 P LANNING GUIDE OUTDOOR KITCHEN PLANNING GUIDE

4 VQBO3021 VQBO4121 VQBO5322 • commercial-type construction, design and styling • all cabinets are constructed completely of heavy-duty stainless steel • fully concealed door hinges • Professional-style handles match Viking outdoor appliances • drawers equipped with full extension slides • optional toe kick included • two-year limited warranty - door hinges and drawer slides • lifetime limited warranty - all stainless steel components *Note – grill is not included with the cabinet and must be purchased separately. All cabinets must be installed with locally supplied countertop. Model...

VBBO2602 5 VBBO1601 • commercial-type construction, design and styling • all cabinets are constructed completely of heavy-duty stainless steel • fully concealed door hinges • Professional-style handles match Viking outdoor appliances • heavy-duty adjustable legs • optional toe kick included • two-year limited warranty - door hinges • lifetime limited warranty - all stainless steel components *Note - neither the VGSB or VGIB burners are included with the cabinet and must be purchased separately. All cabinets must be installed with locally supplied countertop. Model Approx. Shipping wt. lb...

6 VBO1811 VBO1830 VSBO2402 VTPO1810 VSBO3602 • commercial-type construction, design and styling • all cabinets are constructed completely of heavy-duty stainless steel • fully concealed door hinges • Professional-style handles match Viking outdoor appliances • heavy-duty adjustable legs • optional toe kick included • two-year limited warranty - door hinges • lifetime limited warranty - all stainless steel components * All cabinets must be installed with locally supplied countertop. Sink is not supplied with VSBO2402 or VSBO3602. 30”D. OUTDOOR STAINLESS STEEL BASE CABINETS* Model Approx....

7 CABINET SIDE PANELS Approx. Shipping wt. lb (kg) 16 (7.3) 15 (6.8) 33 (14.9) VSP30 (30”W. x 29 3/4”H. ) - To finish the side of any base cabinet at the end of a run VTHP30 (30”W. x 34”H. ) - Half oven tower side panel. For use when countertop runs into the oven tower VTSP30 (30”W. x 68”H. ) - Oven tower side panel for use at the end of a run • heavy-duty stainless steel • used to finish sides of base cabinets at the end of the cabinet run • fit flush into recessed sides of cabinets • optional toe kick included Model FILLER STRIPS Model Approx. Shipping wt. lb (kg) 5 (2.3) 5 (2.3) 5 (2.3)...

8 Please see installation examples on page 11 for more information on when to use these. • heavy-duty stainless steel • for use in custom island installations • individual back panels for each Viking outdoor cabinet • 3¼4” thickness will add to the depth of the cabinetry • optional toe kick included VIKING BACK PANELS FOR USE IN CUSTOM ISLAND APPLICATIONS Model Approx. Shipping wt. lb (kg) 10 (3.7) 12 (5.4) 15 (6.8) 17 (7.7) 20 (9.1) 21 (9.5) 23 (10.4) 25 (11.3) 32 (14.5) 34 (15.4) 5 (2.3) VBP16 (16”W. back panel) For use with VBBO1601 VBP18 (18”W. back panel) For use with...

VBO1811 VQBO5322 VBO1830 WALL OF HOUSE VSP30 VEUO3202 VBPFLR4 (stainless facing out) VBPFLR4 (stainless facing out) VTSP30 VTHP30 9 PLANNING YOUR VIKING OUTDOOR KITCHEN Anticipate your requirements for your outdoor kitchen to get the most flexibility during its use. With a complete Viking outdoor kitchen, you now have not only the most complete line of outdoor appliances, but also the cabinets that provide the same storage and organizational capabilities of an indoor kitchen. Now you can prepare your appetizers, drinks and food outside while remaining part of the group, rather than having...

10 Example: Against a non-combustible surface when refrigeration is used If any of the undercounter refrigeration products are installed in the cabinet run, either a VURO2400 or VURO3200 should be installed to allow for solid installation of the side panel and to make a strong base on which the countertop will sit. If the refrigeration falls in the end of a run a, 30”W. side panel (VSP30) should be used. If used in conjunction with a Viking outdoor grill, a VBPFLR4 should be used along with the VSP30 to insure meeting grill specifications (see page 9 example). VQBO4121 NON-COMBUSTIBLE...

11 Example: Island Installations The cabinets can also be installed in an island format. If desired, a half-wall can be built at the back and side panels (SP30) can be used to finish the sides. All the cabinets will be lined up flush at the face, or a 3-sided half-wall could be built to eliminate the side panels. Alternatively, islands can be finished with Viking produced back panels. There are individual panels made to fit each individual cabinet offered by Viking. The result is a smooth, custom fit finish. Example without oven cabinet ending run: Example with oven cabinet: As shown in the...

12 *Please note: If a VFLR4 is used in an island setting, a VBPFLR4 is used as the back panel. Installations Requiring a 4”W. Filler Strip There are several situations where 4”W. back panel (VBPFLR4) and back panels need to be used. The VLFR4 is a 4”W., 341¼2”H. (includes 41¼2” toe kick area) stainless steel “post” sandwiched between two cabinets. 1) Use a 4”W. filler whenever two Viking appliances are installed side-by-side in the run. This will give the appliances ample room for any clearance issues they may have in their general specifications. Remember that 8” is required for proper...

13 When to Use Inside and Outside Filler Strips Together (see sample drawing below) In situations where the back of your cabinet layout is exposed, such as in an island setting, inside and outside filler strips will need to be used. Use a 90° (VCF90) or 135° (VCF135) inside filler whenever you have a 90 or 135 degree turn. Depending on which turn you are accounting for, a 90° (VOCF90) or 135° (VOCF135) outer corner back panel assembly must be used to complete the layout. These assemblies consist of a 4”W. stainless steel “post”, two mounting brackets, and two stainless steel back panels....