Trenchmat S

Trenchmat S

Product catalog summary
Description: The document details the specifications of TRENCHMAT S, a geocomposite product by Viganò Pavitex S.p.A. It consists of a three-dimensional geomat (GMA), a nonwoven geotextile (GTX-N), and a waterproof film (PL).
Composition: The materials used include Polypropylene for the GMA, Polyester for the GTX-N, and Polyethylene for the PL.
Physical Properties: The mass per unit area is 890 g/m², and the thickness under 2 kPa is 15.0 mm, as per EN ISO 9864 and EN ISO 9863 standards respectively.
Mechanical Properties: The tensile strength in both machine direction (MD) and cross-machine direction (CMD) is 10.0 kN/m, with an elongation at maximum load of 50% in both directions, according to EN ISO 10319. The static puncture resistance (CBR) is 1.8 kN, and the cone drop test perforation is 10 mm, as per EN ISO 12236 and EN ISO 13433. Protection efficiency is rated at 180 N according to EN 14574.
Notes: The data provided are nominal values based on laboratory tests. Viganò Pavitex reserves the right to update the data without prior notice. Roll dimensions have a tolerance of ± 5%. Additional types and information are available upon request.
Contact Information: Viganò Pavitex S.p.A., Via Carlinga 35, 24035 Curno (BG), Tel +39 035 20 19 11, Fax +39 035 20 19 36, Website: www.pavitex.com, Email: [email protected]. The company is ISO 9001 certified.
See more

Catalog excerpts

Trenchmat S-1

COMPREHENSIVE TABLE: DESCRIPTION: COMPOSITION: PHYSICAL PROPERTIES Mass per unit area Thickness under 2 kPa MECHANICAL PROPERTIES Tensile strength MD Tensile strength CMD Elongation at maximum load MD Elongation at maximum load CMD Static puncture resistance CBR Cone drop test perforation Protection efficency TRENCHMAT S STANDARD PRODUCTION Rev 118 Geocomposite (GCO) composed of a threedimensional geomat (GMA), a nonwoven geotextile (GTX-N) and a waterproof film (PL) Polypropylene (GMA), Polyester (GTX-N), Polyethylene (PL) NOTES The indicated data are nominal values, based on the statistic outcome of laboratory tests. Vigano Pavitex has the right to update the data in any moment and without prior notice. Rolls dimension tolerance ± 5%. Other types are available on request. Other information are available on single product datasheet. Vigano Pavitex S.p.A. - Via Carlinga 35, 24035 Curno (BG) Tel +39 035 20 19 11 - Fax +39 035 20 19 36 - www.pavitex.com - [email protected] Company with Management System Quality certified ISO 9001

 Open the catalog to page 1

All Viganò Pavitex catalogs and technical brochures

  1. GEOTEX R/RC

    1  Page

  2. EXPO

    6  Pages

  3. DOMESTIC

    6  Pages

  4. ENTRANCE

    6  Pages

  5. CONTRACT

    8  Pages

  6. MEGATILES

    4  Pages

  7. Recytop

    1  Page

  8. Tridifol

    1  Page

  9. Megamat

    1  Page

  10. Pavimant

    1  Page

  11. TECNOGEO F

    1  Page

  12. STRATUM T

    1  Page

  13. STRATUM

    1  Page

  14. STRATOPLAST

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.