Exhibit with us
*myarchiexpo  
English
  1. Catalogs
  2. Viganò Pavitex
  3. Megamat

Megamat

Megamat
1 / 1 PageView full catalog

Megamat

Product catalog summary
Description: The document details the specifications of MEGAMAT, a three-dimensional geomat (GMA) that can be simple or reinforced with a woven geogrid (GGR). The GMA is composed of polypropylene, while the GGR is made of polyester with a PVC coating.
Physical Properties: The mass per unit area ranges from 300 to 920 g/m², and the thickness under 2 kPa pressure is consistently 17 mm for most variants, except for the initial types which vary from 10 to 19 mm. These measurements comply with EN ISO 9864 and EN ISO 9863 standards.
Mechanical Properties: Tensile strength in the machine direction (MD) varies significantly, starting from >1.2 kN/m for the simplest type to 150 kN/m for the most reinforced type. Cross-machine direction (CMD) tensile strength is consistently >0.3 to 20 kN/m. Elongation at maximum load is >40% for simpler types and 12-13% for reinforced types, adhering to EN ISO 10319 standards.
Notes: The data provided are nominal values derived from laboratory tests. Viganò Pavitex reserves the right to update these values without prior notice. Roll dimensions have a tolerance of ±5%. Additional types and information are available upon request. The company is ISO 9001 certified.
Contact Information: Viganò Pavitex S.p.A., Via Carlinga 35, 24035 Curno (BG), Italy. Tel: +39 035 20 19 11, Fax: +39 035 20 19 36, Website: www.pavitex.com, Email: [email protected]
See more

Catalog excerpts

Megamat-1

STANDARD PRODUCTION COMPREHENSIVE TABLE: DESCRIPTION: COMPOSITION: PHYSICAL PROPERTIES Mass per unit area Thickness under 2 kPa Rev 118 Three dimensional geomat (GMA), simple or reinforced by a woven geogrid (GGR) Polypropylene (GMA), polyester with PVC coating (GGR) MECHANICAL PROPERTIES Tensile strength MD Tensile strength CMD Elongation at maximum load MD Elongation at maximum load CMD NOTES The indicated data are nominal values, based on the statistic outcome of laboratory tests. Vigano Pavitex has the right to update the data in any moment and without prior notice. Rolls dimension tolerance ± 5%. Other types are available on request. Other information are available on single product datasheet. Vigano Pavitex S.p.A. - Via Carlinga 35, 24035 Curno (BG) Tel +39 035 20 19 11 - Fax +39 035 20 19 36 - www.pavitex.com - [email protected] Company with Management System Quality certified ISO 9001

 Open the catalog to page 1

All Viganò Pavitex catalogs and technical brochures

  1. GEOTEX R/RC
    GEOTEX R/RC

    1  Page

  2. EXPO
    EXPO

    6  Pages

  3. DOMESTIC
    DOMESTIC

    6  Pages

  4. ENTRANCE
    ENTRANCE

    6  Pages

  5. CONTRACT
    CONTRACT

    8  Pages

  6. MEGATILES
    MEGATILES

    4  Pages

  7. Recytop
    Recytop

    1  Page

  8. Tridifol
    Tridifol

    1  Page

  9. Pavimant
    Pavimant

    1  Page

  10. Trenchmat S
    Trenchmat S

    1  Page

  11. TECNOGEO F
    TECNOGEO F

    1  Page

  12. STRATUM T
    STRATUM T

    1  Page

  13. STRATUM
    STRATUM

    1  Page

  14. STRATOPLAST
    STRATOPLAST

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.