*myarchiexpo

SIENA

Product catalog summary

Description: SIENA is a high-quality acrylic wall coating with a fine trowelled texture, suitable for both exterior and interior surfaces such as rendered mortars, concrete, prefabricated panels, and gypsum plasters. It offers protection and decoration, being resistant to shocks, abrasion, and weathering. The coating is impermeable to atmospheric water while maintaining breathability, and it mimics thin mineral renders, making it ideal for refurbishing old texture coatings without intermediate coats.

Method of Application:

Thoroughly mix the product until homogeneous.
Apply a layer with a stainless steel trowel to a thickness matching the size of the guiding grains in the product.
Allow the product to dry slightly, then compact and uniform the coating with a plastic trowel.
Let the first coat dry for about 24 hours.
Apply a second coat with a stainless steel trowel and finish with a sponge trowel for a thin render effect.

Consumption Rate: Approximately 2.2 kg/m² in two coats.

Interiors/Exteriors: Suitable for both interior and exterior applications.

Warning: The colors shown are indicative only.

Catalog excerpts

Siena Acrylic wall coating fine texture 1. Thoroughly mix up the product till it becomes homogeneous. 2. Apply a layer of SIENA with a stainless steel trowel in a thickness approximately equal to the size of the guiding grains contained in the product itself. 3. Allow the product to dry just a little then re-pass over with a plastic trowel to compact and uniform the coating. 4. Allow the first coat to dry for about 24 hours. 5. Apply the second coat always with a stainless steel trowel and finish the surface by lightly working the surface with a sponge trowel to attain the characteristic thin...

Open the catalog to page 2

SIENA

SIENA

Catalog excerpts

All Viero catalogs and technical brochures