4000 Series GSM Audio Intercom with Proximity We recommend This equipment is installed by a Competent Electrician, Security or Communications Engineer.

4000 Series GSM Audio Intercom with Proximity Declaration of Conformity EU RoHS DECLARATION OF CONFORMITY 2G version Telit Communications certifies that the GL865-QUAD V3 (Quad Band GSM850/EGSM900/DCS1800/PCS1900 GPRS Wireless Module) is in conformity with Directive 2011/65/EU of the European Parliament and the Council of 8th June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. The conformity with the applicable requirements of the Directive 2011/65/EU has been demonstrated against the following harmonized standard: EN 50581:2012 Technical...

4000 Series GSM Audio Intercom with Proximity 4000 Series GSM Audio Intercom - Technical Manual

4000 Series GSM Audio Intercom with Proximity Introduction MANUAL INTRODUCTION The information in this manual is intended as an installation and commissioning guide for the 4000 series GSM PRO audio intercom system. This manual should be read carefully before the installation commences. Any damage caused to the equipment due to faulty installation where the information in this manual has not been followed is not the responsibility of Videx Security Ltd. It is recommended that the GSM audio intercom is installed by a competent electrician, security or communications engineer. For UK customers...

4000 Series GSM Audio Intercom with Proximity NETWORK PROVIDER SELECTION It is imperative that for the reliable operation of the system that the best network provider for the area is selected. Problems such as network disconnection can occur if the provider has signal or interference problems for that area. We would recommend using a GSM signal strength meter to survey the intended antenna location. Contact Videx for more information on where to purchase a tester. For UK customers, as an initial check we also recommend visiting the ofcom website www.ofcom.org.uk and follow the onsite links to...

4000 Series GSM Audio Intercom with Proximity vxVIDEX A system comprises of an intercom panel, power supply, SIM card (SIM card not provided by Videx) and antenna. The intercom panel is part of the Videx 4000 series modular design allowing it to be customised to the installation requirements for example including coded access, proximity access or including the correct number of call buttons (up to 50 call buttons). ART. 4810 GSM (PRO) INTERCOM AVAILABLE VERSIONS The intercom panel can include any of the modules from the 4000 series range and uses the standard 4000 series surface and flush mounting...

4000 Series GSM Audio Intercom with Proximity System Components and Available Versions BUTTON MATRIX WIRING BUTTON MODULE NOTES If the GSM module has 1 button (Art.4810-1), the additional button module buttons should be wired starting from button number 2 (i.e. the first button of the button module should be connected between a & 2, the next between a & 3 etc.). If the GSM module has 2 buttons (Art.4810-2), the additional button module buttons should be wired starting from button number 3 (i.e. the first button of the button module should be connected between a & 3, the next between a & 4 etc.)....

Surface Back Boxes and Mounting Frames Surface Back Box Dimensions (inc. optional surface rainshields) 4000 Series GSM Audio Intercom - Technical Manual - 8 - 66250754-EN - V1.3 - 18/06/20

4000 Series GSM Audio Intercom with Proximity System Components and Available Versions 12VDC 2A POWER SUPPLY (HDR-15-12) The Art. 4810 GSM PRO intercom is designed to work with power supplies in the range of 12Vdc and should be capable of supplying a constant current of no less than 1A. Both the GSM4K and GSM4KCR kits are supplied with a slim line HDR-15-12, 12Vdc 1.25A power supply (refer to Fig.7). ART. 432 GSM ANTENNA The Art.432 GSM antenna connects to the SMA female bulkhead connection on the rear of the Art.4810 GSM PRO module. A GSM antenna with an SMA male connector should be used (refer...

^VIDEX THE POWER TO SECURE 4000 Series GSM Audio Intercom with Proximity 1 Outdoor station composed of: 1 Art. 4810-1: 1 button GSM (pro) unit GSM4KCR-1S - surface mounting 1 Outdoor station composed of: 1 Art. 4810-1: 1 button GSM (pro) unit GSM INTERCOM AUDIO KITS GSM4KCR-2S - surface mounting 1 GSM antenna Art. 432 1 Outdoor station composed of: 1 Art. 4810-2: 2 button GSM (pro) unit 4000 Series GSM Audio Intercom - Technical Manual - 10 - 66250754-EN - V1.3 - 18/06/20

^VIDEX THE POWER TO SECURE 4000 Series GSM Audio Intercom with Proximity GSM4K AUDIO KITS Additional GSM4K-n (flush) kit versions are available from 3 way kits up to 12 way kits: GSM4K-3 up to GSM4K-12. Each audio kit comes with the appropriate Art.4810 GSM module, appropriate extension button module(s) and appropriate flush back box depending on the GSM4K-n kit required (where n = the number of call buttons), refer to table below. Additional GSM4K-nS (surface) kit versions are available from 3 way kits up to 12 way kits: GSM4K-3S to GSM4K-12S. Each audio kit comes with the appropriate Art.4810...

4000 Series GSM Audio Intercom with Proximity Art. 4810 Technical Information ART. 4810 GSM (PRO) MODULE □ 4810-0 ■ 4810-1 □ 4810-2 □ 4810-ID □ 4810-2D ■ STEEL □ ALI □ HIGH BRASS 4000 Series GSM Audio Intercom - Technical Manual - 12 - 66250754-EN - V1.3 - 18/06/20

^VIDEX THE POWER TO SECURE 4000 Series GSM Audio Intercom with Proximity terminals continued... TECHNICAL SPECIFICATION Working Voltage: Standby Current: Max. Current: Call Buttons: Telephone Numbers per Button: Dial to Open Numbers: Proximity Access (fobs/cards): Coded Access: Call Progress LED's: Programming Method: RS485 Bus Connection: Push to Exit Input: Auxiliary Inputs: Auxiliary Outputs: Dry Contact Relay: Event Logging: USB Port: Timebands: Working Temperature: 12 - 24Vdc or ac +/- 10% approx. 60mA approx. 500mA (max.) up to 50 (max.) 4 telephone numbers (1 primary, 3 diverts) up to...