NXPTZR SERIES2
7Pages

NXPTZR SERIES2 NEW GENERATION OF RADIOMETRIC THERMAL PTZ CAMERAS FOR MARITIME AND INDUSTRIAL APPLICATIONS IP66/IP67 IP68/IP69 MAXIMUM RESISTANCE IN THE MOST CRITICAL ENVIRONMENTS • Thermal camera with radiometric functions • Entirely made from AISI 316L electropolished stainless steel • Maximum resistance in corrosive environments • Junction box with integrated SFP slot to allow fiber optic connection INSTALLATION FLEXIBILITY The new generation NXPTZR SERIES2 with thermal vision has a high level of protection in preventative security applications in highly corrosive environments, such as industrial and marine offshore/onshore areas where events may need to be detected at great distances and in critical conditions such as total darkness or low visibility. Compared to the previous generation, the SERIES2 range cameras have the possibility of easily connecting the PTZ using fibre optic thanks to the slot of the SFP module installed directly at the bottom of the unit and on installation of the specific accessory NXPTZSFP which provides a cable input on the product dedicated to fibre optic. The NXPTZR SERIES2 is resistant to rust and corrosion and does not require maintenance thanks to the absolute precision of the construction process and the solid AISI 316L stainless steel construction with mirco-shot and electropolished surfaces. There are numerous accessories available including a washing system, and wall, parapet, corner and pole supports that mean installation is extremely flexible. As well as this, the compact design means it can be installed in the tightest spaces, while the unit's reduced weight makes assembly simple. CERTIFIED QUALITY A huge number of tests of all types are carried out on products so that they comply with the strict requirements of the quality standards. The results leave no doubt about the exceptional robustness, undeniable reliability and unrivalled performance of Videotec’s products. IP66/IP67/IP68 certification guarantees complete protection against weather and water immersion. In addition, the IP69 certification means the product can be cleaned with high pressure and high temperature water. NXPTZR SERIES2 operates at maximum efficiency between -40°C and +65°C. The NXPTZ series products are Lloyd's Register Type Approval System Test Specification Number 1 certified and therefore can be used in Marine and Offshore applications for environmental categories ENV1, ENV2, ENV3 and ENV5 (eg. passenger ships, open-air decks, closed spaces and technical areas that may be subject to heat generated by other equipment, docking procedures). WWW.VIDEOTEC.COM - DATA SHEETS NXPTZR-SERIES2_EN_2020-09-18 THERMAL CAMERA WITH RADIOMETRY FUNCTIONS The integrated LWIR thermal camera can identify targets moving in the dark or at distance with extreme accuracy. As well as this, it has radiometric functions that allow precise temperature detection based on the image’s 4 main pixels. The device can be configured so that it independently generates a Radiometric Alarm and/or Warning via ONVIF Events on the VMS. For example, an event can be sent when: the temperature is below a settable value; the temperature is above a settable value; the temperature is between two settable values; the temperature is outside two settable values. This function is particularly useful when monitoring industrial processes. In camera models with advanced radiometric functions, up to 5 ROIs (Regions of Interest) can be set for each preset position. The defined ROIs are scaled proportionally to the digital zoom. So, when zooming in the ROI is increased and when zooming out the ROI is decreased. PTZ ROIs are set to preset PAN and TILT positions (not zoom) so they then change in relation to the zoom. In camera models with advanced radiometric functions, thermal cameras offer three temperatures: minimum, average and maximum. Radiometric rules can be linked to exceeding one of these three temperature thresholds. Specifications subject to change without notice. © VIDEOTEC S.p.A. All rights reserved. The mentioned names of products or companies are trademarks or registered

GEOMOVE FUNCTION The new NXPTZR SERIES2 PTZ video cameras can be geo-localized on the maps to support the GeoMove features.. The GeoMove feature is very useful in perimeter surveillance systems and for port traffic control because it lets you capture any target through geographic coordinates, even in critical visibility or offshore conditions. The GeoMove feature can typically be activated using a camera with Videotec Analytics on board, or through third-party software such as Video Management Software (VMS), which provide the geographic coordinates of a target and use them to guide the...

ELECTRICAL Supply voltage/Current consumption: • 230Vac ±10%, 0.5A max, 50/60Hz • 120Vac ±10%, 1A max, 50/60Hz • 24Vac ±10%, 5A max, 50/60Hz Power consumption: • 120W max • 30W, P&T static, heating switched off NETWORK RJ45 port • Ethernet connection: 10BASE-T/100BASE-T Slot SFP (SMALL FORM FACTOR PLUGGABLE) • Ethernet connection:100BASE-FX • Supply voltage: 3.3V • Standard: compliant MSA The SFP module (not supplied by VIDEOTEC) must meet the following requirements: • Laser: Class 1, complies with EN60825-1 • Certification: UL/IEC 60950-1 or UL/IEC 62368-1 CYBERSECURITY Digitally signed...

ENVIRONMENT For indoors and outdoors installation Operating temperature • Continuous working: from -40°C (-40°F) up to +65°C (149°F) • Temperature test complies with NEMA-TS 2-2003 (R2008) par. 2.1.5.1, test profile fig. 2-1 (from -34°C (-29.2°F) to +74°C (165.2°F)) • De-icing function intervention (cold start): from -40°C (-40°F) up to -10°C (14°F) Relative humidity: from 5% up to 95% CERTIFICATIONS Electrical safety (CE): EN60950-1, IEC60950-1, EN62368-1, IEC62368-1 Electromagnetic compatibility (CE): EN61000-6-4, EN61000-3-2, EN61000-3-3, EN50130-4, EN55032 (Class A) Outdoor installation...