MAXIMUS MPXR SERIES2 NEW GENERATION OF EXPLOSION-PROOF PTZ WITH THERMAL CAMERA • Certified explosion-proof for use in Zones 1 and 2, Group IIC (Gas), Zones 21 and 22, Group IIIC (Dust) • Certified up to a temperature of +80°C • Maximum resistance in corrosive environments • Possibility of direct connection via fiber optic • Thermal camera with radiometric functions   MAXIMUM RESISTANCE IN THE MOST CRITICAL ENVIRONMENTS MAXIMUS MPXR SERIES2 is a certified explosion-proof PTZ thermal camera, ideal for effective video surveillance and process control in the Oil & Gas, marine or industrial sectors, in environments where the atmosphere is potentially explosive due to the presence of flammable gas or dust. MAXIMUS MPXR SERIES2 offers maximum resistance in corrosive environments with industrial and marine environments thanks to construction in AISI 316L stainless steel and micro-shot peened and electro-polished surfaces. Furthermore, the IP66/IP67/IP68/IP69, NEMA Type 4X and Type 6P certification guarantees complete protection against water and dust entry, even in difficult conditions. CERTIFIED QUALITY Every version of MAXIMUS MPXR SERIES2 PTZ is explosion-proof certified with a ambient temperature of up to +80°C. They have international certifications for use in Zone 1 and 2, Group IIC for gas, Zone 21 and 22, Group IIIC, Class 1 Div. 2, for dust (ATEX, IECEx, UL/CSA, EAC Ex, INMETRO, KCs). Thanks to the double cable entry, both 120Vac and 230Vac voltage supply versions are compliant with UL/CSA standards. MAXIMUS MPXR SERIES2 products are certified Lloyd's Register Marine Type Approval System Test Specification Number 1 and can be used in Marine and Offshore applications for type ENV1, ENV2, ENV3 and ENV5 environmental categories (for example passenger ships, open decks, enclosed spaces, technical premises subject to heat generated by other equipment, areas at risk of explosion and as visual support for mooring manoeuvres). WWW.VIDEOTEC.COM - DATA SHEETS MAXIMUS-MPXR-SERIES2_EN_2021-02-04 RADIOMETRIC FUNCTIONS FOR MEASURING TEMPERATURE The integrated thermal camera can identify targets moving in the dark or at distance with extreme accuracy. As well as this, it has radiometric functions that allow precise temperature detection based on the image’s 4 main pixels. The device can be configured so that it independently generates a Radiometric Alarm and/or Warning via ONVIF Events on the VMS. For example, an event can be sent when: the temperature is below a settable value; the temperature is above a settable value; the temperature is between two settable values; the temperature is outside two settable values. This function is particularly useful when monitoring industrial processes. In camera models with advanced radiometric functions, up to 5 ROIs (Regions of Interest) can be set for each preset position. The defined ROIs are scaled proportionally to the digital zoom. So, when zooming in the ROI is increased and when zooming out the ROI is decreased. PTZ ROIs are set to preset PAN and TILT positions (not zoom) so they then change in relation to the zoom. In camera models with advanced radiometric functions, thermal cameras offer three temperatures: minimum, average and maximum. Radiometric rules can be linked to exceeding one of these three temperature thresholds. INSTALLATION FLEXIBILITY The SERIES2 range of cameras can easily connect the PTZ via fibre optic thanks to the SFP module slot installed directly into the junction box integrated into the base of the unit. The double cable entry and the numerous accessories and supports available (washing system, communication box, pre-wired cables, cable glands, wall supports, railing supports, corners and pole), allow exceptional installation flexibility. Specifications subject to change without notice. © VIDEOTEC S.p.A. All rights reserved. The mentioned names of products or companies are trademarks o

GEOMOVE FUNCTION The GeoMove function offered by the new MAXIMUS MPXR SERIES2 uses two connected cameras that communicate with each other through intelligent language, meaning advanced actions can be carried out in even the most basic surveillance systems. GeoMove can be used with fixed or PTZ cameras that have VIDEOTEC ANALYTICS and monitor a certain area. When a target is sighted, the camera sends the geo-coordinates of the target to a MAXIMUS MPXR SERIES2 PTZ that uses them to frame the target. The GeoMove function can interface with third-party software that gives an objects geo-coordinates,...

WWW.VIDEOTEC.COM DATA SHEETS Specifications subject to change without notice. © VIDEOTEC S.p.A. All rights reserved. The mentioned MAXIMUS-MPXR-SERIES2_EN_2021-02-04 names of products or companies are trademarks

ACCESSORIES MBX1MAA Explosion-proof communication box in stainless steel, IN 230Vac, with EMC filter for marine certification MBX2MAA Explosion-proof communication box in stainless steel, IN 24Vac, with EMC filter for marine certification MBX3MAA Explosion-proof communication box in stainless steel, IN 120Vac, with EMC filter for marine certification MBA1S5A Explosion-proof communication box in aluminium, IN 230Vac MBA2S5A Explosion-proof communication box in aluminium, IN 24Vac MBA3S5A Explosion-proof communication box in aluminium, IN 120Vac OCTEX3/4C Cable gland in nickel-plated brass with...

THERMAL CAMERAS (RESOLUTION 336X256) Radiometric analysis does not affect camera performance. THERMAL CAMERAS (RESOLUTION 640X512) Radiometric analysis does not affect camera performance. WWW.VIDEOTEC.COM - DATA SHEETS MAXIMUS-MPXR-SERIES2_EN_2021-02-04 Specifications subject to change without notice. © VIDEOTEC S.p.A. All rights reserved. The mentioned names of products or companies are trade

CABLE GLANDS AND ACCESSORIES 3/4" NPT WWW.VIDEOTEC.COM - DATA SHEETS MAXIMUS-MPXR-SERIES2_EN_2021-02-04 Specifications subject to change without notice. © VIDEOTEC S.p.A. All rights reserved. The mentioned names of products or companies are trademark