- Catalogs
- Vicoustic - Innovative Acoustic Solutions
- Cinema Round _manual_2021_V2
Cinema Round _manual_2021_V2
Cinema Round _manual_2021_V2
- Included: Measuring Tape, Level
- Not Included: Cinema Round Premium x8, VicFix Base, VicFix J Profile 80mm | 3.14", Glue
The VicFix J Profile fixation system can be used with VicFix Base, which is sold separately.
Installation Procedure:- Examine wall and ceiling surfaces to ensure they are clean, smooth, and dry.
- If surfaces are unpainted gypsum board, prime them with a drywall primer to equalize absorption, then apply paint and allow it to dry as per the manufacturer's instructions.
- Apply glue to the back of each acoustic panel near the edges and attach it to the wall within 10 minutes of applying the glue.
- Press the panel firmly against the wall for 15 seconds to ensure it stays fixed.
- Do not adjust the panel after bonding to maximize glue strength.
- This method is applicable to both wall and ceiling installations.
- Ensure the room conditions are suitable for receiving acoustic panels.
Main Office, R&D & Logistics: Avenida do Pólo 3, Nº 159, Carvalhosa, 4590-137 Paços de Ferreira, Portugal
Office: Rua Quinta do Bom Retiro Nº 16, Armazém 9, 2820-690 Charneca da Caparica, Portugal
Phone: (+351) 212 964 100
Email: [email protected]
Website: www.vicoustic.com
© Vicoustic, 2021 | V2. No parts of this document may be copied or published without written consent from Vicoustic.
Catalog excerpts
Installation Manual Cinema Round Premium
Open the catalog to page 1
MATERIAL NEEDED Included Cinema Round Premium x8 Measuring Tape You may also install this product with the new VicFix J Profile fixation system using VicFix Base, sold separately. VicFix Base
Open the catalog to page 2
Cut the tip of the glue nozzle according to the diagram. Apply the glue on the back of the acoustic panel, near the edges. Do not wait longer than 10 minutes after applying the glue to attach the panel to the wall. Place the panel on the suitably chose position on the wall. Once in the desired place, press firmly against the wall for 15 seconds. To ensure that you maximise the strength of the glue, don’t make any adjustments to the panel after bonding Wall and ceilling surfaces should be examined prior to installation, ensuring they are clean, smooth, and dry. If you have unpainted gypsum board...
Open the catalog to page 3
Main Office, R&D & Logistics Avenida do Pólo 3, Nº 159, Carvalhosa 4590-137 Paços de Ferreira, Portugal Office Rua Quinta do Bom Retiro Nº 16, Armazém 9 2820-690 Charneca da Caparica, Portugal T (+351) 212 964 100 Info and Sales E [email protected] www.vicoustic.com © Vicoustic, 2021 | V2 No parts of this document might be copied and/or published without written consent of Vic
Open the catalog to page 4All Vicoustic - Innovative Acoustic Solutions catalogs and technical brochures
VicStrip20 Pages
VicWallpaper VMT1 Page
VicStrip - Product Info1 Page
VicStrip Look Book12 Pages
PI_Flat Panel VMT1 Page
PI_Cinema Round Premium1 Page
Public Spaces Catalog64 Pages
- Commercial acoustic panel
- Rectangular acoustic panel
- Decorative acoustic panel
- Acoustic wall panel
- Office acoustic panel
- Ceiling acoustic panel
- Interior acoustic panel
- Public building acoustic panel
- Home acoustic panel
- Wooden acoustic panel
- High-performance acoustic panel
- Colored acoustic panel
- Fire-retardant acoustic panel
- Design acoustic panel
- Brown acoustic panel
- Gray acoustic panel
- White acoustic panel
- Fabric acoustic panel
- Auditorium acoustic panel