MECHANICAL EXPANSION JOINT Floor to Floor | Floor to Wall 25 -100 mm ( 1 - 4” ) Expansion Gaps Expansion Joint Selection Criteria Joint Load Rating Product Details Eurocode Rating Product Dimensions Height Product Sightline Floor - Wall Secondary membrane or structural waterproofing bonded to the substrate. HTB-180 High Temperaturerated Butyl membrane bonds to both the frame and underside of the stainless steel capping to create a waterproof seal at the surface of the expansion joint. Central seal Optional Aquatec 1500 secondary membrane epoxy bonded to the substrate either side of the expansion gap. This membrane is looped into the expansion gap to accommodate movement. VEXCOLT An Atec Company | United Kingdom | T : +44 (0) 3707 876 543 | E : [email protected] | W : www.vexcolt.com HTB-180 butyl membrane bonds directly to structural (or secondary) waterproofing membranes. Fully waterproof Grade 6063 T6 aluminium frame Geotextile fleece surface designed to facilitate a high strength bond to backfilled materials such as mastic asphalt, concrete, epoxy mortar and el

MECHANICAL EXPANSION JOINT Features Surface Americans with Disabilities Act (ADA) compliant across the entire movement cycle Central seal has a ribbed surface for improved slip resistance. Movement Good movement capacity ASTM E-1399 Class I: Thermal Class II: Wind System Options Gap width(s) Height(s) Metal type(s): Seal colour(s) Fire barrier Waterproofing Pre-assembly in factory 25, 50, 75, 100 mm 28, 35, 50, 75 mm Aluminium 316 - Grade stainless steel cappings Black, Grey 120-240 minutes Waterproofing membrane Contact Vexcolt APPLICATIONS Airport Terminals | Educational | Exhibition Centres...