VEXCOLT An Atec Company SeismAtec seismic pan expansion joint system for floors Typical Components (1) Concrete slab (2) High strength (>40N/mm2) levelling bed (by others) (3) Optional 1.14mm thick Vexcolt EPDM membrane or torch applied waterproofing membrane (by others) (4) M6 x 75mm galvanise dipped, carbon steel, self-tapping concrete screws (5) Continuous aluminium floor frame (6) Continuous aluminium central pan (7) Aluminium pivot plates to allow escape by people suffering from disabilities during a seismic event. These plates form ADA Compliant ramps if the pan lifts during an earthquake. (8) High strength (>60N/mm2) epoxy mortar bed (by others) (9) Finishes/wearing surfaces (10) Centering bar (11) Reinforcing mesh (by others)

SEISMIC EXPANSION JOINT Floor to Floor | Floor to Wall 100 - 500 mm ( 4 - 20” ) Expansion Gaps SeismAtec 400 : A01-A02 Expansion Joint Selection Criteria SeismAtec 400 : A01 Load Rating Movement Capacity (mm) Thermal ± Eurocode Rating Product Details Product Dimensions Height Product Sightline Floor Floor a. 50mm deep systems are only suitable for the installation of 10mm deep paving within the central pan b. 60mm deep systems are suitable for the installation of paving up to 20mm deep within the central pan | United Kingdom | T : +44 (0) 3707 876 543 | E : [email protected] | W : www.vexcolt.com...

SEISMIC EXPANSION JOINT Floor to Floor | Floor to Wall Features Surface Smooth transit central pan system. During a seismic event the central pan lifts and the winged side frames rotate to provide safe egress to people with mobility difficulties. Fully Americans with Disabilities Act (ADA) compliant across the entire movement cycle Movement Seismic movement capacity ASTM E-1399 Class I: Thermal Class II: Wind Class III: Seismic Thermal & Wind movement: +/-25mm Seismic movement: +/-50% of expansion gap width System Options Gap width(s) Height(s) Metal type(s) Seal colour(s) Fire barrier Waterproofing...