VEXCOLT An Atec Company Concrete slab Screed or mortar/sand-cement bed Finishes/wearing surface Saw cut Metal support frame Seal Thin-bed adhesive control joints for floors Control joints installed with finishes laid on a thin bed adhesive 2 to 5mm deep. Control joints that are compression fitted into a slot or saw-cut formed between finishes/wearing surface. Control joints that are installed as finishes are being laid on wet mortar or a sand/cement bed.

CONTROL JOINT Floor to Floor 3 - 7 mm ( 3/32 - 1/4” ) Joint Width Micratec : SE + SV Control Joint Selection Criteria Load Rating Product Details Eurocode Rating ± 1.0 Floor - Floor VAMAC | United Kingdom | T : +44 (0) 3707 876 543 | E : [email protected] | W : www.vexcolt.com When specifying or ordering please select EPDM or VAMAC core colour as black, grey or stone. When specifying or ordering please add the height (H1) required to the Product Reference. For example Micratec : SE-005-050 denotes a control joint 50mm high. Product Sightline ± 1.0 Floor - Floor EPDM Product Dimensions

CONTROL JOINT Features Surface Easy transit: Americans with Disabilities Act (ADA) compliant across the entire movement cycle 3mm minimum visible line width between finishes VAMAC versions of these joints are London Underground Limited 1-085 ‘Fire Safety Performance of Materials’ tested and approved for below ground applications such as metro stations. Movement Excellent movement capacity for profile width System Options Sightline width(s) Height(s) Metal type(s) Seal colour(s) Pre-assembly in factory 3, 5, 7 mm 25, 50, 75, 100 mm Stainless Steel, Brass Black, Grey, Stone Not applicable APPLICATIONS...